Trijicon Scope Rings, 30mm High, Q-LOC, Fits Picatinny, Anodized Finish, Black AC22066

Trijicon Scope Rings – 30mm High – Q-LOC™ Quick-Release – Fits Picatinny – Anodized Black – AC22066 – UPC 719307618947 Get the height, speed, and stability your rifle demands. The Trijicon 30mm High Q-LOC™ Scope Rings (AC22066) combine quick-release convenience with precision-machined strength for 30mm optics on MIL-STD-1913 Picatinny rails. The high ring height is ideal for rifles that need extra objective bell clearance, night-vision/thermal bridge space, or a heads-up shooting posture on chassis and AR-style platforms. Finished in anodized black for durability and low glare, these rings deliver the secure clamping and return-to-zero consistency premium glass deserves.* *Return-to-zero performance depends on rail quality, repeatable mounting technique, and correct torque. Key Benefits Q-LOC™ quick-release: Remove or reattach your scope rapidly for transport, maintenance, or swapping setups—without tools. High optical centerline: Provides additional clearance for large objective lenses, flip caps, and NV/thermal clip-ons; supports a more upright head position on modern stocks and chassis. Rock-solid hold: Wide clamp footprint and robust cross-bolt geometry resist recoil-induced shift to help keep zero secure. True tube alignment: Matched 30mm ring halves minimize scope stress for clean optical performance and predictable turret tracking. Duty-ready finish: Hard anodized black aluminum resists corrosion, abrasion, and harsh weather while reducing reflections. Ideal Use Cases Precision & DMR builds: Elevate the optic for comfortable posture with bipods, bags, or barricades. AR-pattern & chassis rifles: Achieve the optical height needed to clear handguards and maintain heads-up ergonomics. Night vision & thermal users: Extra height helps align day optics behind clip-on devices mounted forward of the scope. Crossover competition/hunting: Swap optics season-to-season with Q-LOC™ speed and repeatability. Feature Highlights Tube Size: 30mm Height Class: High (verify exact height against your rifle, barrel contour, and objective diameter) Rail Interface: MIL-STD-1913 Picatinny Mounting System: Q-LOC™ quick-release with adjustable clamp tension Construction: Precision-machined aluminum with robust steel hardware Finish: Anodized black (low-glare, corrosion resistant) Model / SKU: AC22066 UPC: 719307618947 Ring height and required clearance vary with scope model, eyepiece/ocular size, objective bell diameter, and rail height-over-bore. Measure before purchase for best results. On-Rifle Advantages You’ll Notice Comfortable head position: High rings promote a natural cheek weld and faster sight acquisition—especially with bulkier ear pro or armor. Cleaner tracking & groups: Proper alignment reduces tube stress, aiding consistent dialing and return-to-zero. Repeatable setup: With a consistent rail slot and torque, Q-LOC™ supports reliable POI after removal/reinstall. Compatibility Notes Platforms: Any rifle with an in-spec Picatinny top rail (bolt actions, ARs, and chassis systems). Optics: 30mm main-tube scopes from Trijicon and other premium manufacturers. Adapters: Not intended for Weaver-only or Dovetail rails without a Picatinny adapter. Installation (Quick Start) Unload & clear your rifle. Prep surfaces: Degrease ring screws, clamp faces, and rail slots. Place rings: Set spacing to your scope’s tube length; seat the Q-LOC™ clamps against a recoil slot. Set the optic: At max magnification, set eye relief and level the reticle. Torque properly: Tighten cap screws in an X-pattern to the scope manufacturer’s ring-cap torque; set Q-LOC™ clamp tension per Trijicon guidance. Confirm zero: Verify at the range; add witness marks for quick visual checks after travel. Pro tip: Record rail slot position and torque values in your data book for repeatable remounts. Care & Maintenance Periodic torque checks: Re-verify after your first range day and after large temperature/altitude changes. Keep it clean: Brush grit from the rail and clamp surfaces; wipe with a soft cloth (avoid harsh abrasives). Travel smart: Inspect witness marks and clamp tension after flights or rough vehicle rides. Safety & Responsibility Respect torque specs: Over-tightening can deform scope tubes; under-tightening invites movement under recoil. Verify clearance: Ensure bolt handle, ocular/eyepiece, and objective bell clear the barrel and rail accessories. Four rules always: Safe handling at the bench and in the field. Specifications (At-a-Glance) Brand: Trijicon Product: Scope Rings, 30mm High, Q-LOC™ Tube Diameter: 30mm Height: High (check clearance requirements) Interface: Picatinny (MIL-STD-1913) Material: Aluminum body, steel hardware Finish: Anodized Black Model/SKU: AC22066 UPC: 719307618947 Why Choose Trijicon AC22066? Q-LOC™ quick-release with dependable repeatability High ring height for objective clearance and modern, heads-up ergonomics Trijicon-grade machining for alignment, durability, and confidence on serious rifles SEO Highlights (Quick Scan) Trijicon 30mm High Q-LOC scope rings Picatinny quick-release, anodized black aluminum, precision machining AC22066, UPC 719307618947 Ideal for AR/chassis rifles, NV/thermal clip-on clearance, and large objectives Suggested Meta Title Trijicon 30mm High Q-LOC Scope Rings – Picatinny, Anodized Black | AC22066 | UPC 719307618947 Suggested Meta Description Gain height and speed with Trijicon 30mm High Q-LOC™ scope rings. Quick-release Picatinny interface, anodized black aluminum, and precision alignment for modern rifles and large objectives. Model AC22066, UPC 719307618947. The End