Trijicon Scope Rings – 30mm Low – Q-LOC™ Quick-Release – Fits Picatinny – Anodized Black – AC22064 – UPC 719307618923
Lock your optic down with repeatable precision—and take it off just as fast. The Trijicon 30mm Low Q-LOC™ Scope Rings (AC22064) deliver a rock-solid, quick-release mounting solution for 30mm tube optics on MIL-STD-1913 Picatinny rails. Precision-machined and anodized black for duty-grade durability, these low-height rings are ideal for bolt-action hunting rifles, lightweight mountain rigs, and precision builds that need a low optical centerline for proper cheek weld, objective bell clearance, and sleek, snag-resistant handling.
Why Q-LOC™? Trijicon’s Q-LOC™ interface is engineered for secure clamp force and repeatable return-to-zero, letting you remove and reinstall your optic for transport, maintenance, or swapping setups—without losing confidence in your zero.*
*Return-to-zero depends on rail quality, repeatable mounting technique, and proper torque.
Key Benefits
Fast, tool-friendly removal: Q-LOC™ mechanism enables quick-release on Picatinny rails for cleaning, travel, or switching optics between uppers/rifles.
Low optical centerline: Low-height 30mm rings help achieve a natural cheek weld, reduce visual parallax from poor head position, and maintain a compact profile on bolt guns.
Rock-solid hold: Wide clamping surface and precision cross-bolts resist recoil shift, protecting your zero on powerful calibers.
True tube alignment: Matched ring halves minimize scope stress for clean glass performance and predictable turret tracking.
Duty-ready finish: Black anodized aluminum resists corrosion, wear, and glare—perfect for harsh weather and rough travel.
Ideal Use Cases
Backcountry & mountain rifles: Keep weight down, maintain a low scope height, and still get quick removal for packing or maintenance.
Precision bolt guns: Low rings optimize optic-to-bore relationship and eye position for prone and bench shooting.
LE/military marksman setups: Q-LOC™ speed with return-to-zero confidence for mission-ready rifles.
Crossover hunting/competition rigs: Swap glass as seasons change—spotter-friendly LPVOs to higher-mag scopes—without redoing your whole mount.
Feature Highlights
Tube Size: 30mm
Height Class: Low (optimized for lower optical centerline; verify objective diameter vs. barrel/rail clearance)
Rail Interface: MIL-STD-1913 Picatinny
Mounting System: Q-LOC™ quick-release with adjustable clamping tension
Construction: Precision-machined aluminum with robust steel hardware
Finish: Matte black anodized (low-glare, corrosion resistant)
Model / SKU: AC22064
UPC: 719307618923
Exact ring height dimension and objective clearance depend on your rifle, rail height, scope objective bell, and barrel contour. Measure before purchase for best results.
On-Rifle Advantages You’ll Notice
Natural head position: Low rings bring the optic line closer to the bore, improving cheek weld and reducing neck strain in prone.
Cleaner tracking & groups: Properly aligned rings minimize tube stress, helping your scope dial and return accurately.
Consistent zero after removal: With good technique and an in-spec rail, Q-LOC™ supports repeatable point of impact after remounting.
Compatibility Notes
Rifles: Any platform with an in-spec Picatinny top rail (bolt-action, chassis systems, AR-style uppers with appropriate eye relief/height needs).
Scopes: 30mm main-tube optics from Trijicon and other premium manufacturers.
Not for: Weaver-only or Dovetail rails without a Picatinny adapter.
Installation (Quick Start)
Unload & clear your rifle.
Prep surfaces: Degrease ring screws, rail clamp, and rail slots.
Place rings on rail: Set spacing to match your scope’s tube length; seat Q-LOC™ clamps against a recoil slot.
Set the optic: At max magnification, establish eye relief and level the reticle.
Torque evenly: Tighten cap screws in an X-pattern to the scope manufacturer’s ring-cap torque spec; set Q-LOC™ clamp tension per Trijicon’s guidance.
Verify zero: Confirm at the range and add witness marks for quick visual checks.
Pro tip: Record your torque values and rail slot positions in your logbook for fast, repeatable setups.
Care & Maintenance
Periodic torque checks: Re-verify after the first range session and after significant temperature or altitude changes.
Keep it clean: Brush away dust/grit from the rail interface; wipe with a soft cloth—avoid aggressive abrasives on anodized surfaces.
Travel-smart: Inspect witness marks and reconfirm clamp tension after flights or bumpy rides.
Safety & Responsibility
Respect torque specs: Over-tightening can deform scope tubes; under-tightening invites movement under recoil.
Confirm clearance: Ensure bolt handle, ocular/eyepiece, and objective bell clear the barrel and rail.
Four rules always: Safe handling applies at the bench and in the field.
Specifications (At-a-Glance)
Brand: Trijicon
Product: Scope Rings, 30mm Low, Q-LOC™
Tube Diameter: 30mm
Height: Low (verify objective clearance)
Interface: Picatinny (MIL-STD-1913)
Material: Aluminum body, steel hardware
Finish: Anodized Black
Model/SKU: AC22064
UPC: 719307618923
Why Choose Trijicon AC22064?
Q-LOC™ quick-release with return-to-zero repeatability
Low-height geometry for natural cheek weld and sleek profiles
Trijicon-grade machining for alignment, durability, and confidence
SEO Highlights (Quick Scan)
Trijicon 30mm low scope rings
Q-LOC™ quick-release for Picatinny rails
Anodized black aluminum, precision machining
AC22064, UPC 719307618923
Suggested Meta Title
Trijicon 30mm Low Q-LOC Scope Rings – Picatinny, Anodized Black | AC22064 | UPC 719307618923
Suggested Meta Description
Get fast, repeatable mounting with Trijicon 30mm Low Q-LOC™ Scope Rings. Quick-release Picatinny interface, anodized black aluminum, and precision alignment for hunting and precision rifles. AC22064, UPC 719307618923.
The End
