Trijicon Scope Rings, 34mm Extra High, Q-LOC, Fits Picatinny, Anodized Finish, Black AC22071

Trijicon Scope Rings – 34mm Extra High – Q-LOC™ Quick-Release – Fits Picatinny – Anodized Black – AC22071 – UPC 719307618992 Push your setup higher—without compromising strength or repeatability. The Trijicon 34mm Extra High Q-LOC™ Scope Rings (AC22071) give precision shooters and professional users a quick-release, duty-ready solution for 34mm main-tube optics on MIL-STD-1913 Picatinny rails. The extra-high centerline provides the vertical space modern rifles need for large objective lenses, flip caps, and front-mounted night vision/thermal clip-ons, while enabling a comfortable, heads-up shooting posture with armor, ear pro, and chassis/AR stocks. Finished in anodized black and built with steel hardware, these rings deliver Trijicon’s hallmark alignment, durability, and return-to-zero confidence when installed correctly. Why extra high Q-LOC rings? You get the height required for clip-on devices and oversized objectives—plus fast removal/re-attachment and repeatable POI on quality Picatinny rails with proper torque and technique. Key Benefits Q-LOC™ quick-release: Remove or remount your optic in seconds for transport, cleaning, or mission changes—no special tools required. Extra-high optical centerline: Clears 50–56 mm objectives, caps, and NV/thermal bridges while promoting a more upright head position for faster sight acquisition. Rock-solid retention: Wide clamp footprint and robust cross-bolt geometry help resist recoil-induced shift and protect your zero on magnum and gas-gun platforms. True tube alignment: Matched 34mm ring halves minimize scope stress, supporting crisp glass performance and predictable turret tracking. Field-hard finish: Matte black anodized aluminum shrugs off weather and abrasion; steel hardware boosts long-term durability. Ideal Use Cases AR-pattern & chassis rifles: Achieve modern optic height for comfortable cheek weld with risers, plates, and ear pro. NV/Thermal ecosystems: Extra height streamlines day-optic alignment behind clip-on devices on forward rails. PRS/DMR & LE marksman builds: Quick-release flexibility with repeatable return-to-zero for mission-ready reliability. Big-objective hunting glass: Confident clearance for large bells and sunshades without sacrificing stability. Feature Highlights Tube Diameter: 34 mm Height Class: Extra High (verify exact height against your scope’s objective, caps, and rail height-over-bore) Rail Interface: MIL-STD-1913 Picatinny Mounting System: Q-LOC™ quick-release with adjustable clamp tension Construction: Precision-machined aluminum with steel fasteners Finish: Anodized black (low-glare, corrosion resistant) Model / SKU: AC22071 UPC: 719307618992 Clearance varies with rail height, barrel/handguard diameter, and the scope’s objective + protective caps/sunshade. Always measure before purchase. On-Rifle Advantages You’ll Notice Heads-up ergonomics: Extra height reduces neck strain and speeds reticle acquisition—especially in armor or with thick hearing protection. Cleaner dialing & groups: Properly aligned rings reduce tube stress, aiding consistent tracking and return-to-zero. Repeatable POI after removal: With consistent rail slot placement and torque, Q-LOC™ supports reliable point of impact after remounting. Compatibility Notes Platforms: Any rifle with an in-spec Picatinny top rail (bolt actions, ARs, and chassis systems). Optics: 34 mm main-tube scopes from Trijicon and other premium brands. Adapters: Not for Dovetail or Weaver-only bases without a Picatinny adapter. Installation (Quick Start) Unload & clear the rifle. Prep interfaces: Degrease ring screws, clamp faces, and rail slots. Place rings: Space to support the tube (avoid erector/turret housing); seat the clamps against a recoil slot. Set the optic: At max magnification, establish eye relief and level the reticle. Torque correctly: Tighten cap screws in an X-pattern to your scope maker’s ring-cap torque; set Q-LOC™ clamp tension per Trijicon guidance. Confirm zero: Verify on the range; add witness marks to screws/clamps for quick post-travel checks. Pro tip: Record your rail slot position and torque values in a logbook to make remounts fast, consistent, and repeatable. Care & Maintenance Torque checks: Re-verify after your first range session and after big temperature/altitude swings. Keep interfaces clean: Brush grit from rail/clamp faces; wipe anodized surfaces with a soft cloth—avoid harsh abrasives. Travel smart: Inspect witness marks and clamp tension after flights or bumpy rides. Safety & Responsibility Respect torque specs: Over-tightening can deform scope tubes; under-tightening invites movement under recoil. Verify clearances: Ensure bolt throw, eyepiece, and objective bell clear the handguard and barrel. Four rules always: Maintain safe firearm handling during setup and use. Specifications (At-a-Glance) Brand: Trijicon Product: Scope Rings, 34mm Extra High, Q-LOC™ Tube Diameter: 34 mm Height: Extra High (measure for your setup) Interface: Picatinny (MIL-STD-1913) Material: Aluminum body, steel hardware Finish: Anodized Black Model/SKU: AC22071 UPC: 719307618992 Why Choose Trijicon AC22071? Q-LOC™ quick-release with dependable repeatability Extra-high geometry for NV/thermal and large-objective clearance Trijicon-grade machining for alignment, durability, and confidence on serious rifles SEO Highlights (Quick Scan) Trijicon 34mm extra high Q-LOC scope rings Picatinny quick-release, anodized black aluminum, steel hardware Ideal for NV/thermal clip-ons, heads-up ergonomics, and large objectives AC22071, UPC 719307618992 Suggested Meta Title Trijicon 34mm Extra High Q-LOC Scope Rings – Picatinny, Anodized Black | AC22071 | UPC 719307618992 Suggested Meta Description Gain height and speed with Trijicon 34mm Extra High Q-LOC™ rings. Quick-release Picatinny interface, anodized black aluminum, and precise alignment for clip-on NV/thermal and large-objective optics. Model AC22071, UPC 719307618992. The End