Trijicon Scope Rings – 34mm Low – Q-LOC™ Quick-Release – Fits Picatinny – Anodized Black – AC22068 – UPC 719307618961
Keep your optic low, locked, and perfectly aligned. The Trijicon 34mm Low Q-LOC™ Scope Rings (AC22068) provide a quick-release mounting system for 34mm main-tube scopes on MIL-STD-1913 Picatinny rails. Engineered for precise tube alignment and repeatable clamping force, these low-height rings are ideal for bolt guns and lightweight hunting builds where a lower optical centerline delivers a natural cheek weld, improved consistency, and sleek, snag-resistant handling. The anodized black finish shrugs off weather, abrasion, and glare for season-after-season durability.
Why Q-LOC™? Trijicon’s Q-LOC™ interface is designed to deliver secure clamp force with repeatable return-to-zero, so you can remove or reattach your scope for cleaning, travel, or swapping glass—without sacrificing confidence in your zero.*
*Return-to-zero depends on rail quality, repeatable technique, and proper torque.
Key Benefits
Low optical height: Keeps the scope close to the bore for a natural cheek weld, stable head position, and reduced parallax errors from inconsistent mount.
Quick-release flexibility: Q-LOC™ lever system enables fast on/off on Picatinny rails—great for multi-role rifles and protected transport.
Rock-solid hold: Broad rail engagement and robust cross-bolt geometry resist recoil-induced movement to help protect your zero.
True tube alignment: Matched 34mm ring halves reduce tube stress for clean optical performance and predictable turret tracking.
Duty-ready finish: Anodized black aluminum with steel hardware for low glare, corrosion resistance, and field-hard reliability.
Ideal Use Cases
Precision hunting rifles: Lower centerline for comfortable prone shots and steady cheek weld on lightweight mountain rigs.
Bolt-action target builds: Keep the optic low for consistent head placement on bags and bipods.
Crossover competition/hunting: Q-LOC™ speed lets you swap optics to match season or stage.
Suppressed & big-objective setups: Verify clearance; low rings can still fit many 34mm scopes with moderate objective diameters.
Feature Highlights
Tube Size: 34mm
Height Class: Low (confirm objective bell and barrel/rail clearance for your setup)
Rail Interface: MIL-STD-1913 Picatinny
Mounting System: Q-LOC™ quick-release with adjustable clamp tension
Construction: Precision-machined aluminum rings with steel hardware
Finish: Matte black anodized (low-glare, corrosion resistant)
Model / SKU: AC22068
UPC: 719307618961
Exact ring height spec and required clearance depend on your rifle’s rail height, barrel contour, and the scope’s objective diameter—including caps and sunshades. Measure before purchase.
What You’ll Notice on the Rifle
Faster natural sight picture: Lower optic height helps your eye fall into alignment without hunting for the reticle.
Cleaner groups & tracking: Proper alignment minimizes tube stress, aiding consistent dialing and return-to-zero.
Repeatable POI after removal: With consistent rail slot placement and torque, Q-LOC™ supports reliable point of impact after remounting.
Compatibility Notes
Platforms: Any rifle with an in-spec Picatinny top rail (bolt actions, chassis systems; certain AR applications if a low centerline is desired).
Optics: 34mm main-tube scopes from Trijicon and other premium manufacturers.
Not for: Dovetail or Weaver-only rails without a Picatinny adapter.
Installation (Quick Start)
Unload & clear the rifle.
Prep interfaces: Degrease ring screws, clamp faces, and rail slots.
Place rings: Set spacing to support the scope tube (avoid turrets/erector); seat Q-LOC™ clamps against a recoil slot.
Set the optic: At max magnification, establish eye relief and level the reticle.
Torque properly: Tighten cap screws in an X-pattern to your scope maker’s spec; adjust Q-LOC™ clamp tension per Trijicon guidance.
Confirm zero: Verify at the range and add witness marks to clamp and cap screws for quick visual checks.
Pro tip: Log your rail slot position and torque values—remounting becomes fast and repeatable.
Care & Maintenance
Torque checks: Re-verify after your first range session and after major temperature or altitude swings.
Keep it clean: Brush grit from rail/clamp faces; wipe anodized surfaces with a soft cloth—avoid harsh abrasives.
Travel smart: Inspect witness marks and clamp tension after flights or rough rides.
Safety & Responsibility
Respect torque specs: Over-tightening can deform scope tubes; under-tightening invites movement under recoil.
Verify clearance: Ensure bolt handle, ocular/eyepiece, and objective bell clear the barrel and rail accessories.
Four rules always: Maintain safe firearm handling during setup and use.
Specifications (At-a-Glance)
Brand: Trijicon
Product: Scope Rings, 34mm Low, Q-LOC™
Tube Diameter: 34mm
Height: Low (verify clearance)
Interface: Picatinny (MIL-STD-1913)
Material: Aluminum body, steel hardware
Finish: Anodized Black
Model/SKU: AC22068
UPC: 719307618961
Why Choose Trijicon AC22068?
Q-LOC™ quick-release with dependable repeatability
Low-height geometry for natural cheek weld and sleek profiles
Trijicon-grade machining for alignment, durability, and confidence on serious rifles
SEO Highlights (Quick Scan)
Trijicon 34mm low Q-LOC scope rings
Picatinny quick-release, anodized black aluminum, steel hardware
Ideal for bolt-action precision and hunting rifles
AC22068, UPC 719307618961
Suggested Meta Title
Trijicon 34mm Low Q-LOC Scope Rings – Picatinny, Anodized Black | AC22068 | UPC 719307618961
Suggested Meta Description
Mount your 34mm scope the right way with Trijicon Low Q-LOC™ rings. Quick-release Picatinny interface, anodized black aluminum, and precise alignment for hunting and precision rifles. Model AC22068, UPC 719307618961.
The End
