Trijicon Scope Rings – 34mm Medium – Q-LOC™ Quick-Release – Fits Picatinny – Anodized Black – AC22069 – UPC 719307618978
Balance height, speed, and rock-solid alignment. The Trijicon 34mm Medium Q-LOC™ Scope Rings (AC22069) deliver a quick-release mounting solution for 34mm main-tube optics on MIL-STD-1913 Picatinny rails. Engineered for strength and precision, these medium-height rings hit the sweet spot for most bolt guns and chassis rifles—offering reliable objective clearance, a natural cheek weld, and repeatable return-to-zero. The anodized black finish shrugs off weather, abrasion, and glare, making them a smart, duty-ready upgrade for premium glass.
Why Q-LOC™? Trijicon’s Q-LOC™ interface provides confident clamp force with repeatable POI after removal, so you can travel, clean, or swap optics and get back on target quickly—when installed on an in-spec Picatinny rail and torqued correctly.*
*Return-to-zero depends on rail quality, consistent slot placement, and proper torque.
Key Benefits
Ideal “Goldilocks” height: Medium rings typically clear common objective sizes while maintaining a low, natural head position for stability and comfort.
Quick-release flexibility: Q-LOC™ clamps let you remove or reattach the optic fast for transport, maintenance, or mission-specific swaps.
Rock-solid retention: Broad rail engagement and robust cross-bolt geometry help resist recoil shift, protecting your zero on powerful calibers.
True tube alignment: Matched 34mm ring halves minimize scope stress for clean optical performance and predictable turret tracking.
Field-hard finish: Matte black anodized aluminum with steel hardware for corrosion resistance and long service life.
Ideal Use Cases
Precision hunting rifles: Medium height fits many 34mm optics with popular objective sizes, keeping your cheek weld consistent in prone.
Chassis & PRS rigs: Enough clearance for caps and sunshades while preserving a lower optic-to-bore relationship for faster indexing.
Crossover builds: One set of rings for the field and the range; Q-LOC™ makes swapping glass straightforward.
Suppressed setups: Medium height pairs well with larger barrels and handguards—verify your objective diameter for best fit.
Feature Highlights
Tube Diameter: 34mm
Height Class: Medium (confirm objective bell, rail height, and barrel/handguard clearance for your rifle)
Rail Interface: MIL-STD-1913 Picatinny
Mounting System: Q-LOC™ quick-release with adjustable clamp tension
Construction: Precision-machined aluminum rings with steel fasteners
Finish: Matte black anodized (low-glare, corrosion resistant)
Model / SKU: AC22069
UPC: 719307618978
Exact clearance depends on rail height, barrel contour, scope objective diameter, and accessory caps. Measure before purchase to ensure optimal fit.
What You’ll Notice on the Rifle
Natural sight picture: Medium height aligns easily with a proper cheek weld, reducing neck strain and parallax-inducing head bob.
Cleaner groups & dialing: Properly aligned rings reduce tube stress, aiding repeatable tracking and return-to-zero.
Consistent POI after removal: With consistent rail slot placement and torque, Q-LOC™ supports reliable point of impact after remounting.
Compatibility Notes
Platforms: Any rifle with an in-spec Picatinny top rail (bolt actions, chassis systems; certain AR applications when a medium centerline is desired).
Optics: 34mm main-tube scopes from Trijicon and other premium manufacturers.
Not for: Dovetail or Weaver-only rails without a Picatinny adapter.
Installation (Quick Start)
Unload & clear the rifle.
Prep interfaces: Degrease ring screws, Q-LOC™ clamp surfaces, and rail slots.
Place rings: Space to support the scope tube (avoid turrets/erector housing); seat clamps against a recoil slot.
Set the optic: At max magnification, establish eye relief, then level the reticle.
Torque correctly: Tighten cap screws in an X-pattern to your scope maker’s ring-cap torque spec; set Q-LOC™ clamp tension per Trijicon guidance.
Confirm zero: Verify at the range and add witness marks to screws/clamps for quick visual checks after travel.
Pro tip: Log your rail slot, torque values, and environmental conditions; repeatability improves when everything is documented.
Care & Maintenance
Torque checks: Re-verify after your first range session and after major temperature or altitude swings.
Keep it clean: Brush grit from rail/clamp faces; wipe anodized surfaces with a soft cloth—no harsh abrasives.
Travel smart: Inspect witness marks and clamp tension after flights or rough vehicle rides.
Safety & Responsibility
Respect torque specs: Over-tightening can deform scope tubes; under-tightening invites movement under recoil.
Verify clearances: Ensure bolt handle, ocular/eyepiece, and objective bell clear the barrel, rail, and accessories.
Four rules always: Maintain safe firearm handling during setup and use.
Specifications (At-a-Glance)
Brand: Trijicon
Product: Scope Rings, 34mm Medium, Q-LOC™
Tube Diameter: 34mm
Height: Medium (verify clearance)
Interface: Picatinny (MIL-STD-1913)
Material: Aluminum body, steel hardware
Finish: Anodized Black
Model/SKU: AC22069
UPC: 719307618978
Why Choose Trijicon AC22069?
Q-LOC™ quick-release with dependable repeatability
Medium height that balances clearance and cheek-weld performance
Trijicon-grade machining for alignment, durability, and confidence on serious rifles
SEO Highlights (Quick Scan)
Trijicon 34mm medium Q-LOC scope rings
Picatinny quick-release, anodized black aluminum, steel hardware
Ideal for precision hunting and chassis rifles
AC22069, UPC 719307618978
Suggested Meta Title
Trijicon 34mm Medium Q-LOC Scope Rings – Picatinny, Anodized Black | AC22069 | UPC 719307618978
Suggested Meta Description
Mount your 34mm scope with Trijicon Medium Q-LOC™ rings. Quick-release Picatinny interface, anodized black aluminum, and precise alignment for hunting and precision rifles. Model AC22069, UPC 719307618978.
The End
