Trijicon Scope Rings – 35mm Extra High – Q-LOC™ Quick-Release – Fits Picatinny – Anodized Black – AC22075 – UPC 719307619036
Maximize clearance and modern ergonomics without compromising precision. The Trijicon 35mm Extra High Q-LOC™ Scope Rings (AC22075) deliver a quick-release, duty-grade mounting solution for large-tube 35mm optics on MIL-STD-1913 Picatinny rails. The extra-high centerline gives you the vertical room demanded by 56 mm objectives, flip caps, and night vision/thermal clip-on devices—while supporting a comfortable, heads-up shooting posture on AR-pattern and chassis rifles. Finished in matte black anodized aluminum with steel hardware, these rings provide Trijicon’s signature alignment, durability, and return-to-zero confidence when installed correctly.
Why Extra High Q-LOC™? You get the height modern glass and clip-ons require—plus fast, repeatable on/off capability for travel, maintenance, or mission-specific swaps.*
*Return-to-zero depends on in-spec rails, repeatable slot placement, and proper torque.
Key Benefits
Q-LOC™ quick-release: Remove or remount your scope in seconds—no special tools—while maintaining repeatable POI with correct technique.
Extra-high optical centerline: Clears large objective lenses, caps, and front-mounted NV/thermal bridges; promotes a more upright head position that pairs well with armor and ear pro.
Rock-solid retention: Broad rail engagement and robust cross-bolt geometry resist recoil shift on magnum and gas-gun platforms.
True tube alignment: Matched 35mm ring halves minimize scope stress for clean optical performance and predictable turret tracking.
Field-hard finish: Matte black anodized aluminum for corrosion/abrasion resistance; steel hardware for long-term durability.
Ideal Use Cases
AR-pattern & chassis rifles: Achieve the optic height demanded by today’s handguards and cheek risers.
NV/Thermal integration: Extra space simplifies alignment behind clip-on devices without contorting your head position.
PRS/DMR & LE marksman builds: Quick-release flexibility with repeatable zero for mission-ready reliability.
Big-objective hunting glass: Confident clearance for 50–56 mm objectives and sunshades, plus flip caps.
Feature Highlights
Tube Diameter: 35mm
Height Class: Extra High (verify exact height for your scope objective, caps, rail height-over-bore, and barrel/handguard clearance)
Rail Interface: MIL-STD-1913 Picatinny
Mounting System: Q-LOC™ quick-release with adjustable clamp tension
Construction: Precision-machined aluminum body with steel fasteners
Finish: Matte black anodized (low-glare, corrosion resistant)
Model / SKU: AC22075
UPC: 719307619036
Clearance depends on your rail height, barrel contour, and the scope’s objective + cap/sunshade dimensions. Measure before purchase.
What You’ll Notice on the Rifle
Heads-up ergonomics: Extra height reduces neck strain and speeds reticle acquisition—especially with plate carriers or thick hearing protection.
Cleaner dialing & groups: Proper alignment reduces tube stress, aiding consistent tracking and return-to-zero after transport.
Confidence after removal: With consistent rail slot placement and torque, Q-LOC™ supports reliable point of impact after remounting.
Compatibility Notes
Platforms: Any rifle with an in-spec Picatinny top rail (bolt actions, ARs, modern chassis).
Optics: 35mm main-tube scopes from Trijicon and other premium manufacturers.
Not for: Dovetail or Weaver-only bases without a Picatinny adapter.
Installation (Quick Start)
Unload & clear the rifle.
Prep interfaces: Degrease ring screws, Q-LOC™ clamp faces, and rail slots.
Place rings: Space to support the scope tube (avoid the turret/erector housing) and seat each clamp against a recoil slot.
Set the optic: At max magnification, establish eye relief and level the reticle.
Torque properly: Tighten cap screws in an X-pattern to your scope maker’s ring-cap torque; set Q-LOC™ clamp tension per Trijicon guidance.
Verify & mark: Confirm zero; add witness marks to screws/clamps for quick post-travel checks.
Pro tip: Log your rail slot and torque values—remounts become fast, consistent, and repeatable.
Care & Maintenance
Torque checks: Re-verify after your first range session and after major temperature/altitude swings.
Keep interfaces clean: Brush grit from rail/clamp faces; wipe anodized surfaces with a soft cloth—avoid harsh abrasives.
Travel smart: Inspect witness marks and clamp tension after flights or rough rides.
Safety & Responsibility
Respect torque specs: Over-tightening can deform scope tubes; under-tightening invites movement under recoil.
Confirm clearances: Ensure bolt throw, eyepiece, and objective bell clear the handguard and barrel.
Four rules always: Maintain safe firearm handling during setup and use.
Specifications (At-a-Glance)
Brand: Trijicon
Product: Scope Rings, 35mm Extra High, Q-LOC™
Tube Diameter: 35mm
Height: Extra High (confirm for your setup)
Interface: Picatinny (MIL-STD-1913)
Material: Aluminum body, steel hardware
Finish: Anodized Black
Model/SKU: AC22075
UPC: 719307619036
Why Choose Trijicon AC22075?
Q-LOC™ quick-release with dependable repeatability
Extra-high geometry for large objectives and NV/thermal clip-ons
Trijicon-grade machining for alignment, durability, and confidence on serious rifles
SEO Highlights (Quick Scan)
Trijicon 35mm extra high Q-LOC scope rings
Picatinny quick-release, anodized black aluminum, steel hardware
Ideal for NV/thermal clip-ons, AR/chassis rifles, and large objective scopes
AC22075, UPC 719307619036
Suggested Meta Title
Trijicon 35mm Extra High Q-LOC Scope Rings – Picatinny, Anodized Black | AC22075 | UPC 719307619036
Suggested Meta Description
Get the clearance and repeatability your rifle needs with Trijicon 35mm Extra High Q-LOC™ rings. Quick-release Picatinny interface, anodized black aluminum, and precise alignment for big objectives and clip-on NV/thermal. Model AC22075, UPC 719307619036.
The End
