Trijicon Scope Rings, 35mm High, Q-LOC, Fits Picatinny, Anodized Finish, Black AC22074

Trijicon Scope Rings – 35mm High – Q-LOC™ Quick-Release – Fits Picatinny – Anodized Black – AC22074 – UPC 719307619029 Raise your optic to the perfect height—without sacrificing strength or repeatability. The Trijicon 35mm High Q-LOC™ Scope Rings (AC22074) deliver a quick-release, precision-machined solution for modern 35mm main-tube optics on MIL-STD-1913 Picatinny rails. The high centerline gives you the clearance needed for large objective lenses, flip caps, and forward-mounted night vision/thermal clip-ons, while promoting a comfortable, heads-up shooting posture on AR-pattern and chassis-based rifles. A matte black anodized finish and steel hardware round out a duty-ready package built for serious hunters, competitors, and professional users. Why High Q-LOC™ rings? You get the height big glass demands—plus fast removal and re-attachment with repeatable point of impact when installed on in-spec rails and torqued correctly.* *Return-to-zero depends on rail quality, consistent slot placement, and proper torque. Key Benefits Q-LOC™ quick-release: Detach or remount your scope in seconds for travel, cleaning, or swapping optics—no special tools needed. High optical centerline: Provides objective bell clearance and space for NV/thermal clip-ons, while supporting an upright head position that works with armor and ear pro. Rock-solid retention: Broad rail engagement and robust cross-bolt geometry help resist recoil-induced shift to protect your zero on magnum and gas-gun platforms. True tube alignment: Matched 35mm ring halves minimize scope stress, preserving optical clarity and predictable turret tracking. Field-hard finish: Matte black anodized aluminum shrugs off weather and abrasion; steel hardware boosts long-term durability. Ideal Use Cases AR-pattern & chassis rifles: Achieve the optic height required for modern ergonomics and rail/handguard clearance. Night vision & thermal ecosystems: Extra height simplifies day-optic alignment behind clip-on devices. PRS/DMR & LE marksman builds: Quick-release convenience with repeatable return-to-zero for mission-ready reliability. Big-objective hunting glass: Confident clearance for 50–56 mm objectives and sunshades, plus flip caps. Feature Highlights Tube Diameter: 35mm Height Class: High (verify exact height against your scope’s objective, caps, rail height, and barrel/handguard) Rail Interface: MIL-STD-1913 Picatinny Mounting System: Q-LOC™ quick-release with adjustable clamp tension Construction: Precision-machined aluminum with steel fasteners Finish: Matte black anodized (low-glare, corrosion resistant) Model / SKU: AC22074 UPC: 719307619029 Clearance varies with rail height-over-bore, barrel profile, and the scope’s objective + cap/sunshade. Always measure before purchase. What You’ll Notice on the Rifle Heads-up ergonomics: High rings reduce neck strain and speed reticle acquisition—especially with plate carriers or thick hearing protection. Cleaner dialing & groups: Proper ring alignment reduces tube stress, aiding consistent tracking and return-to-zero. Confidence after removal: With consistent rail slot placement and torque, Q-LOC™ supports reliable POI after remounting. Compatibility Notes Platforms: Any rifle with an in-spec Picatinny top rail (bolt actions, ARs, chassis systems). Optics: 35mm main-tube scopes from Trijicon and other premium brands. Not for: Dovetail or Weaver-only bases without a Picatinny adapter. Installation (Quick Start) Unload & clear the rifle. Prep interfaces: Degrease ring screws, Q-LOC™ clamp faces, and rail slots. Place rings: Space to support the scope tube (avoid the turret/erector housing); seat clamps against a recoil slot. Set the optic: At max magnification, establish eye relief and level the reticle. Torque properly: Tighten cap screws in an X-pattern to your scope maker’s ring-cap torque; set Q-LOC™ clamp tension per Trijicon guidance. Verify & mark: Confirm zero at the range; add witness marks to screws/clamps for quick post-travel checks. Pro tip: Record the rail slot and torque values in your data book—remounts become fast, consistent, and repeatable. Care & Maintenance Torque checks: Re-verify after your first range session and after significant temperature/altitude swings. Keep interfaces clean: Brush grit from rail/clamp faces; wipe anodized surfaces with a soft cloth—avoid harsh abrasives. Travel smart: Inspect witness marks and clamp tension after flights or rough vehicle rides. Safety & Responsibility Respect torque specs: Over-tightening can deform scope tubes; under-tightening invites movement under recoil. Confirm clearances: Ensure bolt throw, ocular/eyepiece, and objective bell clear the handguard and barrel. Four rules always: Maintain safe firearm handling during setup and use. Specifications (At-a-Glance) Brand: Trijicon Product: Scope Rings, 35mm High, Q-LOC™ Tube Diameter: 35mm Height: High (confirm for your setup) Interface: Picatinny (MIL-STD-1913) Material: Aluminum body, steel hardware Finish: Anodized Black Model/SKU: AC22074 UPC: 719307619029 Why Choose Trijicon AC22074? Q-LOC™ quick-release with dependable repeatability High ring height for clip-on NV/thermal and large-objective clearance Trijicon-grade machining for alignment, durability, and confidence on serious rifles SEO Highlights (Quick Scan) Trijicon 35mm high Q-LOC scope rings Picatinny quick-release, anodized black aluminum, steel hardware Ideal for AR/chassis rifles, NV/thermal clip-ons, and large objectives AC22074, UPC 719307619029 Suggested Meta Title Trijicon 35mm High Q-LOC Scope Rings – Picatinny, Anodized Black | AC22074 | UPC 719307619029 Suggested Meta Description Gain height and speed with Trijicon 35mm High Q-LOC™ rings. Quick-release Picatinny interface, anodized black aluminum, and precision alignment for modern rifles, large objectives, and NV/thermal clip-ons. Model AC22074, UPC 719307619029. The End