Trijicon Scope Rings, 35mm Low, Q-LOC, Fits Picatinny, Anodized Finish, Black AC22072

Trijicon Scope Rings – 35mm Low – Q-LOC™ Quick-Release – Fits Picatinny – Anodized Black – AC22072 – UPC 719307619005 Give your large-tube optic the low, rock-solid foundation it deserves. The Trijicon 35mm Low Q-LOC™ Scope Rings (AC22072) deliver quick-release flexibility and match-grade alignment for modern 35mm scopes mounted on MIL-STD-1913 Picatinny rails. Precision-machined from lightweight, duty-ready aluminum and finished in matte black anodize, these low-height rings keep the optical centerline close to the bore for a natural cheek weld, faster sight acquisition, and a sleeker, snag-resistant rifle profile—without sacrificing clamping strength or return-to-zero repeatability.* *Return-to-zero performance depends on in-spec rails, consistent slot placement, and proper torque. Key Benefits Low optical centerline: Keeps your eye naturally aligned behind the scope for steadier head position, less neck strain, and reduced error from inconsistent cheek weld. Q-LOC™ quick-release: Detach/remount your optic in seconds for cleaning, travel, or swapping glass while maintaining repeatable POI with correct technique. Rock-solid retention: Broad rail engagement and robust cross-bolt geometry help resist recoil-induced shift on hard-running calibers. True tube alignment: Matched 35mm ring halves minimize scope stress for cleaner optical performance and predictable turret tracking. Duty-ready finish: Anodized black aluminum resists corrosion, weather, and abrasion with low-glare discretion; steel hardware adds long-term durability. Ideal Use Cases Precision hunting rifles: Low rings pair perfectly with 35mm hunting glass to keep the rifle trim and the cheek weld consistent in prone and kneeling. Chassis & target builds: Preserve a low optic-to-bore relationship for faster indexing on bags and bipods. Crossover rigs: Use one rifle for range and field—Q-LOC™ makes optic changes and transport straightforward. Suppressed/medium objective setups: Many 35mm scopes with moderate objectives clear just fine at low height—verify measurements. Feature Highlights Tube Diameter: 35mm Height Class: Low (confirm objective bell and barrel/handguard clearance for your exact setup) Rail Interface: MIL-STD-1913 Picatinny Mounting System: Q-LOC™ quick-release with adjustable clamp tension Construction: Precision-machined aluminum body with steel fasteners Finish: Matte black anodized (low-glare, corrosion resistant) Model / SKU: AC22072 UPC: 719307619005 Clearance depends on rail height-over-bore, barrel contour, objective diameter, and cap/sunshade size. Measure before purchase for best results. On-Rifle Advantages You’ll Notice Faster, repeatable sight picture: Lower centerline helps your eye “fall into” the scope naturally from low-ready. Cleaner groups & tracking: Properly aligned rings reduce tube stress, aiding consistent dialing and return-to-zero. Confidence after removal: With consistent rail slot placement and torque, Q-LOC™ supports reliable point of impact after remounting. Compatibility Notes Platforms: Any rifle with an in-spec Picatinny top rail (bolt actions, AR-pattern uppers, and modern chassis systems). Optics: 35mm main-tube scopes from Trijicon and other premium manufacturers. Not for: Dovetail or Weaver-only rails without a Picatinny adapter. Installation (Quick Start) Unload & clear the rifle. Prep interfaces: Degrease ring screws, clamp faces, and rail slots. Place rings: Space to support the scope tube (avoid the erector/turret housing) and seat clamps against a recoil slot. Set the optic: At max magnification, establish eye relief and level the reticle. Torque correctly: Tighten cap screws in an X-pattern to your scope maker’s ring-cap torque; set Q-LOC™ clamp tension per Trijicon guidance. Verify & mark: Confirm zero at the range and add witness marks to screws/clamps for quick post-travel checks. Pro tip: Record rail slot position and torque values in your data book to make remounts fast and repeatable. Care & Maintenance Torque checks: Re-verify after your first range session and after major temperature/altitude swings. Keep it clean: Brush grit from rail/clamp faces; wipe anodized surfaces with a soft cloth—avoid harsh abrasives. Travel smart: Inspect witness marks and clamp tension after flights or rough rides. Safety & Responsibility Respect torque specs: Over-tightening can deform scope tubes; under-tightening invites movement under recoil. Confirm clearances: Ensure bolt throw, ocular/eyepiece, and objective bell clear the barrel/handguard. Four rules always: Maintain safe firearm handling during setup and use. Specifications (At-a-Glance) Brand: Trijicon Product: Scope Rings, 35mm Low, Q-LOC™ Tube Diameter: 35mm Height: Low (verify clearance) Interface: Picatinny (MIL-STD-1913) Material: Aluminum body, steel hardware Finish: Anodized Black Model/SKU: AC22072 UPC: 719307619005 Why Choose Trijicon AC22072? Q-LOC™ quick-release with dependable repeatability Low-height geometry for natural cheek weld and sleek, field-ready handling Trijicon-grade machining for alignment, durability, and confidence on serious rifles SEO Highlights (Quick Scan) Trijicon 35mm low Q-LOC scope rings Picatinny quick-release, anodized black aluminum, steel hardware Ideal for precision hunting and chassis rifles AC22072, UPC 719307619005 Suggested Meta Title Trijicon 35mm Low Q-LOC Scope Rings – Picatinny, Anodized Black | AC22072 | UPC 719307619005 Suggested Meta Description Mount your 35mm scope with Trijicon Low Q-LOC™ rings. Quick-release Picatinny interface, anodized black aluminum, and precise alignment for hunting and precision rifles. Model AC22072, UPC 719307619005. The End