True Precision — 9mm Threaded Barrel for CZ P-10 C | Black Nitride | Includes Thread Protector | Model TP-P10CB-XTBL / TPP10CBXTBL | UPC 719104539247
Turn your CZ into a smooth-shooting, suppressor- or comp-ready performer. The True Precision 9mm Threaded Barrel for CZ P-10 C is a match-grade, drop-in upgrade engineered to tighten groups, improve reliability, and add muzzle-device versatility—without gunsmith headaches. Built from premium 416R stainless steel and finished in a durable black nitride coating, TP-P10CB-XTBL (TPP10CBXTBL) ships threaded and includes a knurled thread protector, so you can run a comp, brake, or suppressor and still carry clean when you don’t.
Models/SKU: TP-P10CB-XTBL / TPP10CBXTBL
UPC: 719104539247
Platform: CZ P-10 C (9mm)
Material: 416R Stainless Steel (match-grade)
Finish: Black Nitride (low glare, wear & corrosion resistant)
Muzzle: Threaded w/thread protector included (common pitch 1/2x28—verify for your unit)
Configuration: Drop-in, non-ported
Why Upgrade to a True Precision Threaded Barrel
Match-grade accuracy from 416R stainless
Gunsmith-preferred 416R supports tight machining tolerances and thermal stability, giving you consistent lock-up and repeatable point of impact through high round counts.
Black nitride durability
The hard, slick nitride finish resists corrosion, carbon adhesion, and holster wear, keeping the bore and exterior running smoother and cleaning easier.
Suppressor & comp ready
Factory threaded muzzle accepts common 9mm devices—mount a suppressor for lower blast and faster follow-ups, or a compensator to flatten muzzle rise. Thread protector keeps things tidy when you’re not.
Enhanced chamber & feed geometry
A SAAMI-spec chamber and polished/throated feed ramp promote reliable feeding with both FMJ training loads and modern JHP defensive ammo.
Target crown precision
A carefully machined crown protects rifling at the muzzle for clean, consistent groups, especially noticeable beyond typical defensive distances.
Note: Always confirm the thread pitch and test your chosen device for proper concentricity and clearances (especially with suppressors).
Performance You’ll Notice
Tighter groups at 15–25 yards and past.
Smoother feeding and consistent ejection with quality ammo.
Cleaner operation thanks to a slick nitride surface.
Device flexibility without compromising daily carry.
Ideal Use Cases
Everyday Carry (EDC): Carry clean with the thread protector; add your device at the range or on the clock.
Training & Classes: Match-grade consistency that withstands high round counts.
Home Defense / Night Practice: Pair a suppressor for better control, communication, and follow-up shots.
Competition / Carry Optics: Add a comp and take advantage of faster splits and flatter recoil.
Key Features at a Glance
Fits: CZ P-10 C (9mm)
Core: 416R stainless steel, CNC-machined
Finish: Black nitride (low-glare, hardened)
Chamber: SAAMI-spec for reliable extraction & case support
Feed Ramp: Polished / throated for smooth cycling
Crown: Precision target crown for accuracy retention
Muzzle: Threaded (includes thread protector)
Install: Drop-in, no permanent mods required
SKU/UPC: TP-P10CB-XTBL / TPP10CBXTBL — 719104539247
Installation & Zero (Quick Plan)
Unload & clear your CZ P-10 C.
Field-strip, replace the factory barrel with the True Precision barrel, and reinstall the recoil system/slide.
Lightly lube bearing surfaces; install the thread protector (hand-snug).
Function check: Hand-cycle to confirm smooth lock-up/unlock and striker reset.
Range verify: Fire 150–200 rounds of quality ball plus 20–50 rounds of your carry load to confirm feeding, extraction, lock-back, and POA/POI.
If adding a device: Install your comp/suppressor per its manual and re-check zero—devices can shift POI.
Suppressor & Comp Notes
Thread pitch: Typically 1/2x28 for 9mm—verify your unit before mounting.
Suppressor use: Confirm baffle alignment (use an alignment rod) and follow the can manufacturer’s guidelines for piston/Nielsen device needs.
Compensators: Use non-permanent thread locker if recommended by the comp maker; confirm reliability and ejection pattern after installation.
Care & Maintenance
Clean bore and chamber with quality solvent; avoid aggressive tools on the crown.
Wipe the nitride exterior with a lightly oiled cloth after range sessions.
Periodically inspect the feed ramp, chamber mouth, and crown for carbon buildup; re-zero after any major accessory changes.
Frequently Asked Questions
Q: Will this fit the P-10 F or P-10 S?
A: This model is cut for the CZ P-10 C. Choose variant-specific barrels for other P-10 sizes.
Q: Is the thread protector included?
A: Yes—the package includes a knurled thread protector to protect the threads when you’re not running a device.
Q: Do I need a gunsmith?
A: Most installs are drop-in. Because pistol tolerances vary, minor fitting may be required in rare cases. If unsure, consult a qualified armorer.
Q: Best ammo for testing?
A: Break in with factory SAAMI-spec FMJ, then verify your JHP carry load for reliability and POI.
Q: Will nitride scratch easily?
A: Black nitride is a hard, wear-resistant treatment that holds up well to holster use—avoid harsh abrasives to keep it looking new.
SEO Highlights (Naturally Woven)
True Precision CZ P-10 C 9mm threaded barrel, black nitride finish, 416R stainless match-grade core, drop-in fit, thread protector included, SAAMI-spec chamber, polished feed ramp, target crown, suppressor- and compensator-ready, TP-P10CB-XTBL / TPP10CBXTBL, UPC 719104539247.
Meta for Your Product Page
Meta Title: True Precision 9mm Threaded Barrel for CZ P-10 C — Black Nitride, Thread Protector | TP-P10CB-XTBL
Meta Description: Match-grade 416R stainless barrel for the CZ P-10 C with black nitride finish. Threaded muzzle with thread protector, SAAMI chamber, polished feed ramp, and target crown. SKU TP-P10CB-XTBL / TPP10CBXTBL — UPC 719104539247.
From daily carry to night-shoot drills, the True Precision Threaded Black Nitride Barrel for CZ P-10 C gives you accuracy, reliability, and device-ready versatility in a clean, drop-in package.
The End
