True Precision Threaded Barrel — Sig Sauer® P365XL | 9mm | Silver | Includes Thread Protector | Model TP-P365XLB-XT / TPP365XLBXT | UPC 719104537939

Give your P365XL a precision heartbeat. The True Precision 9mm Threaded Barrel for Sig P365XL delivers match-focused accuracy in a clean silver finish, plus a secure thread protector for everyday carry. Designed as a drop-in upgrade, this barrel enhances consistency, supports muzzle devices and suppressors (where legal), and keeps your slide cycling smoothly with quality ammo. If you want tighter groups and accessory-ready versatility without gunsmithing, TP-P365XLB-XT (TPP365XLBXT) is the premium path forward.

Model/SKU: TP-P365XLB-XT / TPP365XLBXT
UPC: 719104537939
Platform Fit: Sig Sauer P365XL (factory slides; verify fit with aftermarket slides/compensators)

Why Upgrade to a True Precision P365XL Threaded Barrel

• Match-grade accuracy: Precision machining and a refined bore/crown promote repeatable point of impact and tighter groups from carry to class.

• Accessory-ready threads: Add a compact compensator or run a suppressor (where legal)—the included thread protector keeps threads clean and safe during EDC.

• Drop-in convenience: Engineered for direct replacement of the factory barrel—no gunsmith required for most in-spec pistols.

• Smooth feeding: Enhanced geometry is designed to support reliable cycling across common 9mm loads when properly maintained.

• Durable, low-maintenance finish: The silver treatment (on stainless construction) stands up to sweat, solvents, and holster wear while looking purpose-built and clean.

Key Features at a Glance

• Caliber: 9mm Luger (9×19)

• Compatibility: Sig Sauer P365XL (not standard P365 unless otherwise specified)

• Configuration: Threaded barrel with thread protector (common 9mm pitch is 1/2×28—verify thread pitch prior to ordering devices)

• Finish/Color: Silver

• Installation: Drop-in for most in-spec slides; no permanent mods

• Intended Use: EDC, training & matches, accessory-ready builds (comp or suppressor where legal)

• Model: TP-P365XLB-XT / TPP365XLBXT

• UPC: 719104537939

Note: Always confirm thread pitch, device alignment, and muzzle device torque. For suppressors, use a properly fitted piston/Nielsen device and verify concentricity.

Real-World Benefits

• Flatter shooting setups: Pairing a threaded barrel with a micro-comp can reduce muzzle rise for faster splits in drills.

• Low-light control: Suppressor capability (where legal) helps manage flash and blast, preserving sight picture and awareness.

• Confidence on demand: A consistent lockup and clean crown contribute to predictable cold-bore impacts—key for carry verification and qual days.

Ideal Use Cases

• Everyday Carry (EDC): Keep the thread protector on for daily use; swap on a comp for range sessions.

• Training & Defensive Pistol Classes: Dial in reliability with your preferred ammo; enjoy improved control with a comp/suppressor-approved setup.

• Custom Builds: Pair with optics-ready slides, upgraded triggers, and tuned springs for a cohesive P365XL package.

Installation Overview (Quick Start)

1. Unload & clear your pistol—check chamber and magwell visually and physically.

2. Field strip per Sig’s manual and remove the factory barrel.

3. Install the True Precision barrel; ensure smooth fit in the slide and hood lockup.

4. Hand-tighten the thread protector (use the supplied O-ring if included; recheck periodically).

5. Function check with your recoil assembly; cycle by hand and verify full return to battery.

6. Range verify with your carry ammo and any attached device (comp/suppressor) for POI, reliability, and safe alignment.

Compliance & Safety

• Know your laws: Adding a suppressor or certain muzzle devices may require additional legal steps. Verify federal, state, and local regulations before installation.

• Device alignment: Use proper shims/pistons and confirm bore concentricity to prevent baffle strikes.

• Routine checks: Re-inspect thread protector/device tightness and O-ring condition after live fire.

Specifications (Quick Reference)

• Brand: True Precision

• Product: Threaded Barrel for Sig P365XL

• Caliber: 9mm Luger

• Finish: Silver

• Threads: Typically 1/2×28 (verify for your exact unit)

• Included: Thread protector

• Model/SKU: TP-P365XLB-XT / TPP365XLBXT

• UPC: 719104537939

Frequently Asked Questions

Q: Will this fit the standard P365 or P365 X/XL variants?
A: It’s designed for the P365XL. Some X models share slide lengths; confirm your slide length and barrel spec before purchase.

Q: What thread pitch is it?
A: Most 9mm P365XL barrels use 1/2×28, but verify the pitch listed by your retailer before buying a comp or suppressor parts.

Q: Do I need a gunsmith?
A: It’s a drop-in for most in-spec slides. If you experience unusual resistance, poor lockup, or cycling issues, consult a qualified gunsmith.

Q: Will a compensator affect reliability?
A: Comps can alter cycling. Use quality ammo, keep the pistol properly lubricated, and test thoroughly. Recoil springs and ammo choice may influence performance.

Q: Is the thread protector O-ringed?
A: Many True Precision protectors use an O-ring for retention. Inspect and re-tighten after sessions to keep it secure.

SEO-Friendly Highlights (Naturally Woven)

True Precision P365XL threaded barrel, 9mm silver finish, thread protector included, drop-in Sig P365XL barrel upgrade, accessory-ready 1/2×28 threads (verify), enhanced accuracy and reliability, model TP-P365XLB-XT / TPP365XLBXT, UPC 719104537939.

Meta for Your Product Page

Meta Title: True Precision P365XL 9mm Threaded Barrel — Silver w/ Thread Protector | TP-P365XLB-XT
Meta Description: Upgrade your Sig P365XL with a True Precision 9mm threaded barrel in silver. Drop-in fit, thread protector included, accessory-ready threads for comps/suppressors (verify pitch). Model TP-P365XLB-XT — UPC 719104537939.

Unlock match-grade consistency and build-ready versatility for your Sig with the True Precision P365XL Threaded Barrel—accuracy you can feel, options you can grow into.

The End