True Precision — 9mm Barrel for Springfield Hellcat | 3.10" | 416R Stainless Steel | Drop-In Match Upgrade | Model TPSHCBX | UPC 719104539506
Unlock next-level accuracy and reliability from your micro-compact. The True Precision 9mm Barrel for Springfield Hellcat (3.10") is a drop-in, match-grade upgrade machined from premium 416R stainless steel for precision, durability, and corrosion resistance. Purpose-built to fit the standard Hellcat slide, TPSHCBX (UPC 719104539506) improves consistency with a tight, correct-to-spec chamber, a polished feed system, and a precision target crown—so your EDC shoots like a much bigger gun.
Model/SKU: TPSHCBX
UPC: 719104539506
Fits: Springfield Armory Hellcat (3.10" slide, non-RDP)
Caliber: 9mm Luger
Length: 3.10" (factory length replacement)
Material: 416R Stainless Steel
Finish: Natural stainless (machined)
Why Upgrade to a True Precision Hellcat Barrel
Match-Grade 416R Stainless
Gunsmith-preferred barrel steel offers excellent machinability, strength, and heat resistance, supporting tighter tolerances and long service life.
Drop-In Fit, No Gunsmithing
Precisely cut to factory dimensions for most pistols—install, lube, and shoot (minor fitting can be required on tolerance-stacked frames).
Tighter, Correct-Spec Chamber
Designed to enhance case support and consistency while maintaining reliable extraction and ejection with quality factory ammo.
Enhanced Feed Geometry
A polished, throated feed ramp helps smooth cycle transitions across common bullet profiles for increased reliability.
Target Crown for Accuracy
Precision crown protects the last bit of rifling and helps maintain repeatable POI, especially noticeable beyond typical defensive distances.
Rifling That Plays Well with Common Loads
Optimized for modern 9mm factory ammunition so you can train hard and carry confidently.
Note: Always verify function with your specific pistol and ammo before carry. Some holsters with extreme tolerances may feel different after any barrel change.
Performance You’ll Notice
Tighter groups at typical training distances and out to 25 yards.
Smoother feeding with quality FMJ and JHP defensive loads.
Repeatable zero thanks to consistent lock-up and a protected crown.
Corrosion resistance for sweat, humidity, and daily EDC exposure.
Ideal Use Cases
Everyday Carry (EDC): Carry with confidence after a proper reliability test.
Training & Classes: Match-grade consistency for high-round-count days.
Concealed Carry Optic Setups: A consistent barrel/slide lock-up that supports precise red-dot work.
Key Features at a Glance
Platform: Springfield Hellcat 3.10" (standard)
Caliber: 9mm (SAAMI-spec chamber)
Material: 416R stainless steel, precision machined
Construction: Match-grade, drop-in fit
Crown: Precision target crown
Feed System: Polished/throated feed ramp
Finish: Natural stainless (easy to clean)
SKU/UPC: TPSHCBX / 719104539506
Installation & Break-In (Quick Plan)
Safety First: Unload, clear chamber, and remove the slide per the Hellcat manual.
Swap Barrels: Drop the True Precision barrel into your slide; reassemble, lightly lubricate bearing surfaces.
Function Check: Hand-cycle to confirm lock-up, unlock, and reset.
Range Verify: Run 150–200 rounds of your training ammo and 20–50 rounds of your carry load to confirm feeding, extraction, and POI.
Re-confirm Zero: If you use a red dot or adjustable sights, confirm POA/POI after break-in.
Care & Maintenance
Clean with a quality bore solvent and nylon/brass brush; avoid aggressive steel tools on the crown.
Lightly oil bore and hood after cleaning; wipe exterior before EDC.
Inspect the chamber mouth, feed ramp, and crown regularly for carbon and debris.
Frequently Asked Questions
Q: Will this fit the Hellcat Pro or RDP?
A: This model is cut for the standard Hellcat (3.10"). Pro and RDP variants typically require their specific barrels.
Q: Is it threaded or ported?
A: No. TPSHCBX is a non-threaded, non-ported stainless replacement at factory length.
Q: Do I need a gunsmith?
A: Most users drop-in and go. Because pistol tolerances vary, minor fitting may be required in rare cases. If in doubt, consult a qualified armorer.
Q: What ammo is recommended?
A: Use factory, SAAMI-spec FMJ for break-in, then verify your chosen JHP carry load for reliability and POI.
Q: Will it change my holster fit?
A: Barrel swaps rarely affect trigger-guard or slide geometry, but always check holster retention after any modification.
SEO-Friendly Highlights (Naturally Woven)
True Precision 9mm Hellcat barrel, 3.10" match-grade drop-in, 416R stainless steel, polished feed ramp, target crown, enhanced chamber, reliability and accuracy upgrade, non-threaded Hellcat replacement, TPSHCBX, UPC 719104539506.
Meta for Your Product Page
Meta Title: True Precision 9mm Barrel for Springfield Hellcat — 3.10" 416R Stainless | TPSHCBX
Meta Description: Drop-in, match-grade 416R stainless barrel for the Springfield Hellcat (3.10"). Polished feed ramp, target crown, and precision chamber for accuracy and reliability. SKU TPSHCBX — UPC 719104539506.
From weekday carry to weekend classes, the True Precision 3.10" 416R Stainless Hellcat Barrel gives your micro-compact the accuracy, smooth feeding, and durability you want—without gunsmith headaches.
The End
