True Precision Inc CZ P10C 9mm 4" 416R Stainless Steel TPP10CBXBL

True Precision — CZ P-10 C 9mm Barrel | 4" | 416R Stainless Steel Core, Black Nitride Finish | Match-Grade Drop-In | Model TPP10CBXBL | UPC 719104539155 Give your CZ a precision heartbeat. The True Precision CZ P-10 C 9mm Barrel (4") is a match-grade, drop-in upgrade machined from premium 416R stainless steel and finished in a sleek, durable black nitride coating for maximum wear and corrosion resistance. Built specifically for the CZ P-10 C platform, TPP10CBXBL (UPC 719104539155) tightens groups, smooths feeding, and keeps point-of-impact consistent—so your carry, training, or match pistol performs like a custom build without the gunsmith headache. Model/SKU: TPP10CBXBL UPC: 719104539155 Platform: CZ P-10 C (9mm) Length: 4.00" (factory replacement length) Material: 416R Stainless Steel (match-grade) Finish: Black Nitride (low-glare, hardened) Configuration: Non-threaded / non-ported drop-in Why Upgrade to a True Precision Barrel for the CZ P-10 C Match-Grade 416R Core Gunsmith-preferred 416R stainless supports tight machining tolerances and thermal stability for repeatable accuracy through high round counts. Black Nitride Durability A hard, slick surface that resists corrosion, carbon adhesion, and holster wear, keeping the barrel running cleaner and looking sharp longer. SAAMI-Spec Chamber & Consistent Lock-Up Correct case support and precision hood/shoulder geometry deliver reliable extraction/ejection and a stable POI session after session. Polished / Throated Feed Ramp Enhanced feed geometry promotes smooth cycling with common FMJ training ammo and modern JHP duty/defense loads. Precision Target Crown Protects the muzzle rifling and helps maintain tight, repeatable groups—noticeable past typical defensive distances. Note: As with any pistol component, manufacturing tolerances vary. Most installs are drop-in; a rare setup may require minor fitting. Performance You’ll Notice Tighter groups and cleaner holes at 15–25 yards (and beyond with quality ammo). Smoother feeding with popular FMJ/JHP bullet profiles. Faster, easier cleaning thanks to a slick nitride finish. Consistent POI that supports precise iron- or red-dot work. Ideal Use Cases Everyday Carry (EDC): Confidence after a proper reliability shakedown. Training & High-Round-Count Classes: Match consistency without babying the gun. Competition / Carry Optics: Stable lock-up for dot precision and quick transitions. Key Features at a Glance Fits: CZ P-10 C (9mm) Length: 4.00" OEM replacement (non-threaded) Caliber: 9mm Luger (SAAMI-spec chamber) Material: 416R stainless steel core Finish: Black nitride (hardened, low-glare) Feed System: Polished & throated feed ramp Crown: Precision target crown Install: Drop-in (no permanent mods required) SKU/UPC: TPP10CBXBL / 719104539155 Installation & Break-In (Quick Plan) Unload/Clear: Remove the magazine, lock the slide open, and physically/visually clear the chamber. Swap Barrels: Field-strip the slide and drop in the True Precision barrel. Lightly lube bearing surfaces. Function Check: Hand-cycle to verify smooth lock-up/unlock and striker reset. Range Verify: Fire 150–200 rounds of quality FMJ and 20–50 rounds of your carry JHP to confirm feeding, extraction, ejection, and POI. Confirm Zero: If using a red dot or adjustable sights, re-check POA/POI after break-in. Care & Maintenance Clean bore/chamber with quality solvent and a nylon/brass brush; avoid harsh tools on the crown. Wipe the nitride exterior with a lightly oiled cloth after range sessions. Periodically inspect feed ramp, chamber mouth, and crown for carbon buildup; re-verify zero after major changes. Frequently Asked Questions Q: Will this fit the P-10 F or P-10 S? A: This SKU is for the CZ P-10 C. Choose the model specific to other P-10 sizes. Q: Is this barrel threaded? A: No. TPP10CBXBL is non-threaded, non-ported at factory length. For comps or suppressors, choose a threaded True Precision variant. Q: Do I need a gunsmith? A: Most users experience a true drop-in fit. In rare tolerance-stacked cases, light fitting by a qualified armorer may be required. Q: Best ammo for testing? A: Break in with factory SAAMI-spec FMJ, then verify your carry JHP for reliability and POI. Q: Will it change holster fit? A: Non-threaded replacements rarely affect holster fit, but re-check retention after any component change. SEO Highlights (Naturally Woven) True Precision CZ P-10 C 9mm barrel, 4" 416R stainless steel core with black nitride finish, match-grade drop-in, SAAMI-spec chamber, polished feed ramp, target crown, accuracy and reliability upgrade, TPP10CBXBL, UPC 719104539155. Meta for Your Product Page Meta Title: True Precision CZ P-10 C 9mm Barrel — 4" 416R Stainless, Black Nitride | TPP10CBXBL Meta Description: Match-grade 416R stainless drop-in barrel for the CZ P-10 C with a durable black nitride finish. SAAMI chamber, polished feed ramp, and target crown for tighter groups and smooth reliability. SKU TPP10CBXBL — UPC 719104539155. From weekday carry to weekend classes and club matches, the True Precision 4" 416R Black Nitride Barrel for CZ P-10 C delivers the accuracy, consistency, and durability you want—without the gunsmith hassle. The End