True Precision — Micro Compensator S-Type | Black DLC | 416R Stainless Steel | 1/2x28 Threads | 9mm / .380 ACP | Model TPSMICROBC | UPC 719104540762
Run flatter. Shoot faster. Stay in control. The True Precision Micro Compensator S-Type in Black DLC brings race-gun muzzle control to real-world carry pistols. Precision-machined from 416R stainless steel and coated in an ultra-durable Diamond-Like Carbon (DLC) finish, TPSMICROBC (UPC 719104540762) threads directly to standard 1/2x28 barrels for 9mm or .380 ACP. You get measurable muzzle-rise reduction in a compact, holster-friendly package designed for everyday use, training days, and Carry Optics practice.
Model/SKU: TPSMICROBC
UPC: 719104540762
Material: 416R stainless steel (match-grade barrel steel)
Finish: Black DLC (hard, low-friction, corrosion-resistant)
Calibers: 9mm / .380 ACP
Thread Pitch: 1/2x28 RH
Type: Micro Compensator — S-Type (carry-oriented profile)
Why Choose the True Precision Micro Comp (S-Type, Black DLC)
Flatter recoil impulse
Optimized gas ports vent upward to counter muzzle climb, helping you track irons or a red dot through the shot for tighter splits and faster follow-ups.
Carry-ready size & weight
The micro S-Type adds minimal length and mass, often remaining compatible with open-muzzle holsters, so your EDC stays practical while shooting like a bigger gun.
416R stainless core + DLC armor
Match-barrel steel delivers heat resistance and strength; the DLC topcoat provides exceptional hardness, low friction, and excellent corrosion/holster-wear resistance.
Standard 1/2x28 mounting
Installs on most 9mm/.380 threaded pistol barrels without special adapters. (Always verify thread pitch and barrel protrusion.)
Clean, low-glare look
The black DLC finish blends with nitride slides and duty finishes, resisting scratches and carbon for easy clean-up after high-volume sessions.
Note: Comp performance depends on pistol setup, recoil springs, and ammo. Start with quality factory loads (e.g., 115–147gr 9mm) and confirm reliability. Some platforms benefit from spring tuning.
Performance You’ll Notice
Reduced muzzle rise for quicker second shots
Easier dot tracking on Carry Optics pistols
Less grip fatigue over long training days
More consistent hits in rapid strings and transitions
Ideal Use Cases
Concealed carry pistols with threaded barrels that need just a touch of control
Training & defensive handgun classes where fatigue and heat build up
Carry Optics / USPSA practice without committing to a bulky comp
Micro/compact builds where overall length matters
Key Features at a Glance
Construction: CNC-machined 416R stainless
Finish: Black DLC for hardness and corrosion resistance
Interface: 1/2x28 RH threads (9mm/.380 ACP standard in the U.S.)
Profile: S-Type Micro — minimal added length/weight
Ports: Tuned to mitigate muzzle flip and stabilize sight picture
Install: Simple screw-on fit; timing/retention per included guidance (verify hardware included)
Compatibility Notes
Fits pistols with 1/2x28 threaded 9mm/.380 barrels and sufficient barrel protrusion beyond the slide (Glock, SIG, CZ, M&P, Shadow Systems, etc.).
Works with many open-muzzle holsters. Closed-end holsters may require a comp cut.
Tilting-barrel pistols generally run comps well; verify with your model and ammo.
Installation & Setup (Quick Plan)
Ensure the pistol is unloaded (remove mag, lock open, clear chamber).
Clean barrel threads and test-fit the comp by hand.
Time & secure:
If shims/crush washer are provided or specified, time the ports correctly.
If your unit uses set screws/O-ring retention, apply the recommended thread locker and torque per True Precision’s instructions.
Function check for full lockup and slide/frame clearance.
Range confirm: Fire 150–200 rounds of training ammo; verify reliability, ejection pattern, and benefit. Then test your carry load and re-check POI.
Safety Tip: Periodically verify torque/retention. Comps are not suppressors—do not stack devices unless the manufacturer explicitly allows it.
Care & Maintenance
Allow to cool after shooting; brush carbon from ports and threads with solvent.
DLC cleans quickly—avoid harsh abrasives to preserve the finish.
Re-apply thread locker as recommended and re-torque after deep cleans or high round counts.
Frequently Asked Questions
Q: What thread pitch does it use?
A: 1/2x28 RH, the most common 9mm/.380 ACP pistol pitch in the U.S.
Q: Will it fit my pistol?
A: If your barrel is 9mm or .380 with 1/2x28 threads and enough barrel protrusion, it should fit. Confirm slide/frame clearance and holster compatibility.
Q: Do I need a lighter recoil spring?
A: Many pistols run fine stock. If you see short-stroking, try ammo changes or spring tuning per your platform norms.
Q: Does it increase side blast?
A: All comps redirect gas; expect more lateral blast. Use quality ear/eye protection and mind your partners on the line.
Q: Is hardware included?
A: Timing/retention varies by batch. Follow the included instructions for shims, O-rings, or set screws if provided.
Technical Specs (Summary)
SEO Highlights (Naturally Woven)
True Precision micro compensator S-Type, Black DLC finish, 416R stainless pistol comp, 1/2x28 threads, 9mm/.380 ACP recoil reduction, EDC-friendly compensator, faster follow-up shots, flat-shooting handgun upgrade, TPSMICROBC, UPC 719104540762.
Meta for Your Product Page
Meta Title: True Precision Micro Compensator S-Type — Black DLC, 416R, 1/2x28, 9mm/.380 | TPSMICROBC
Meta Description: Compact S-Type micro compensator in Black DLC, CNC-machined from 416R stainless. 1/2x28 threads for 9mm/.380 ACP pistols. Real recoil control with holster-friendly size. SKU TPSMICROBC — UPC 719104540762.
From daily carry to weekend drills, the True Precision Micro Compensator S-Type (Black DLC) delivers the flat recoil impulse, premium materials, and discreet footprint you need to run your pistol faster—with control you can feel on the clock.
The End
