True Precision — Micro Compensator S-Type | Black Nitride | 416R Stainless Steel | 1/2x28 Threads | 9mm / .380 ACP | Model TPSMICROBL | UPC 719104540717
Control recoil without compromising concealment. The True Precision Micro Compensator S-Type in Black Nitride delivers measurable muzzle-rise reduction for 9mm and .380 ACP pistols while keeping your EDC sleek and holster-friendly. Precision-machined from 416R stainless steel and finished with a tough, low-glare black nitride coating, TPSMICROBL (UPC 719104540717) threads directly to standard 1/2x28 barrels to flatten the dot/sights, speed up follow-ups, and boost confidence on the clock—without race-gun bulk.
Model/SKU: TPSMICROBL
UPC: 719104540717
Material: 416R Stainless Steel (match-grade barrel steel)
Finish: Black Nitride (hardened, corrosion & wear resistant)
Thread Pitch: 1/2x28 RH
Compatible Calibers: 9mm / .380 ACP
Type: S-Type Micro Compensator (carry-oriented profile)
Why Choose the True Precision S-Type Micro Comp
Real recoil & muzzle-flip control
Tuned, upward-venting ports redirect gas to keep the pistol flatter, helping you track irons or a red dot and deliver faster, tighter shot strings.
EDC-ready footprint
The micro form factor adds only minimal length and weight, often remaining compatible with open-muzzle holsters so your everyday carry stays practical.
416R stainless + black nitride durability
Built from the same steel trusted for premium barrels, then finished with black nitride for excellent hardness, corrosion resistance, and easy clean-up after high-round-count sessions.
Standard 1/2x28 mounting
Installs on most 9mm/.380 threaded barrels—no special adapter required. (Always verify your barrel’s thread pitch and that it protrudes beyond the slide.)
Clean, low-glare aesthetic
The nitride finish blends with duty blacks and nitride slides for a stealthy, professional look that shrugs off holster wear.
Note: Comp performance depends on pistol model, spring rates, and ammo. Start with quality factory loads (e.g., 115–147 gr 9mm) and confirm reliability. Some platforms may benefit from recoil spring tuning.
Performance You’ll Notice
Flatter dot/sights for quicker second shots and controlled transitions
Less grip fatigue over long classes and practice days
More consistent hits during rapid fire and bill drills
Cleaner sight picture thanks to balanced gas management
Ideal Use Cases
Concealed Carry Pistols with threaded barrels seeking low-profile control
Training & High-Rep Courses where fatigue accumulates
Carry Optics / USPSA Practice to build speed without adding bulk
Compact & Micro-Compact Builds where overall length matters
Key Features at a Glance
Construction: CNC-machined 416R stainless
Finish: Black nitride (hardened, low-glare, corrosion-resistant)
Interface: 1/2x28 RH threads (U.S. standard for most 9mm/.380 barrels)
Design: S-Type Micro—minimal added length/weight
Ports: Optimized for muzzle-rise mitigation and stable sight tracking
Install: Simple screw-on; timing/retention per included instructions (verify hardware included)
Compatibility Notes
Fits threaded 9mm/.380 ACP pistol barrels with 1/2x28 threads and adequate protrusion beyond the slide (common on Glock, SIG, CZ, M&P, Shadow Systems, etc.).
Works with many open-muzzle holsters; closed-end holsters may require a comp cut.
Tilting-barrel pistols typically run comps well; verify with your model and ammo.
Installation & Setup (Quick Plan)
Ensure unloaded: Remove magazine, lock slide open, visually/physically clear the chamber.
Prep threads: Clean and lightly oil barrel threads; test-fit the comp by hand.
Time & secure:
If shims/crush washer are provided, time the ports per guidance.
If using set screws/O-ring retention, apply the recommended thread locker and torque to spec.
Function check: Confirm full lock-up and that the comp clears slide/frame through recoil.
Range verify: Fire 150–200 rounds of training ammo; confirm reliability, ejection pattern, and POI. Then test your carry load.
Safety Tip: Recheck torque/retention after deep cleans or high round counts. Comps are not suppressors—do not stack devices unless expressly supported by the manufacturer.
Care & Maintenance
Allow to cool; brush carbon from ports/threads with solvent.
Black nitride cleans easily—avoid harsh abrasives to preserve finish.
Periodically re-torque set screws or re-apply thread locker as recommended.
Frequently Asked Questions
Q: What thread pitch does it use?
A: 1/2x28 RH, the most common 9mm/.380 ACP pistol standard in the U.S.
Q: Will it fit my pistol?
A: If your barrel is 9mm or .380 with 1/2x28 threads and enough barrel protrusion, it should fit. Confirm slide/frame clearance and holster compatibility.
Q: Do I need a different recoil spring?
A: Many pistols run fine stock. If you experience short-stroking, consider spring tuning typical for your platform.
Q: Does it increase blast?
A: All comps redirect gas; expect more lateral blast. Use quality ear/eye protection and be mindful of others on the line.
Q: Is timing hardware included?
A: Packaging may vary. Follow the included instructions for shims, O-rings, or set screws if provided.
SEO Highlights (Naturally Woven)
True Precision micro compensator S-Type, black nitride finish, 416R stainless pistol comp, 1/2x28 threads, 9mm/.380 ACP recoil reduction, EDC-friendly compensator, faster follow-up shots, flat-shooting handgun upgrade, TPSMICROBL, UPC 719104540717.
Meta for Your Product Page
Meta Title: True Precision Micro Compensator S-Type — Black Nitride, 416R, 1/2x28, 9mm/.380 | TPSMICROBL
Meta Description: Compact S-Type micro compensator in black nitride, CNC-machined from 416R stainless. 1/2x28 threads for 9mm/.380 ACP pistols. Real muzzle-rise reduction with holster-friendly size. SKU TPSMICROBL — UPC 719104540717.
From everyday carry to weekend drills, the True Precision Micro Compensator S-Type (Black Nitride) gives you flat recoil impulse, premium materials, and a discreet footprint—so you can run your pistol faster and more precisely when it counts.
The End
