True Precision — Micro Compensator S-Type | Gold Finish | 416R Stainless Steel | 1/2x28 Threads | 9mm / .380 ACP | Model TPSMICROG | UPC 719104540694
Make your carry gun shoot flatter—and look custom doing it. The True Precision Micro Compensator S-Type in Gold is a compact, EDC-friendly muzzle device that reduces muzzle rise on 9mm and .380 ACP pistols without adding race-gun bulk. Precision CNC-machined from 416R stainless steel and finished in a striking gold tone, TPSMICROG (UPC 719104540694) threads directly to standard 1/2x28 pistol barrels, delivering faster follow-up shots, cleaner sight tracking, and a distinctive, premium aesthetic that pairs perfectly with black, FDE, or two-tone builds.
Model/SKU: TPSMICROG
UPC: 719104540694
Material: 416R Stainless Steel (match-grade barrel steel)
Finish: Gold (durable, low-glare custom look)
Thread Pitch: 1/2x28 RH
Calibers: 9mm / .380 ACP
Type: S-Type Micro Compensator (carry-oriented, minimal added length)
Why Choose the True Precision S-Type Micro Comp (Gold)
Real Muzzle-Rise Reduction, Micro Size
Tuned, upward-venting ports counter muzzle climb to keep irons or your red dot flatter through the shot—boosting control and tightening split times without turning your EDC into a competition brick.
EDC-Ready Footprint
The micro profile adds minimal length and weight, often remaining compatible with open-muzzle holsters so concealment and comfort stay intact.
416R Stainless Durability
Built from the same steel trusted for premium match barrels, the comp handles heat, cleaning cycles, and daily carry with long-term corrosion resistance.
Bold Gold Finish
A head-turning gold tone elevates your build with a custom shop look that complements nitride, DLC, stainless, and cerakote slides.
Standard 1/2x28 Mounting
Installs directly on most 9mm/.380 threaded barrels—no adapters required. (Always verify your barrel’s pitch and ensure adequate protrusion beyond the slide.)
Note: Comp performance depends on pistol model, recoil spring rate, and ammunition. Start with quality factory 115–147 gr 9mm (or standard .380 ACP) and confirm reliability. Some platforms benefit from spring tuning—follow your pistol’s best practices or consult a qualified armorer.
Performance You’ll Notice
Flatter dot/sight picture for faster second shots and controlled transitions
Reduced grip fatigue over long training days or classes
More consistent hits in rapid strings, bill drills, and movement stages
Cleaner tracking thanks to balanced gas management
Ideal Use Cases
Concealed Carry Pistols with threaded barrels that need discreet control
Training & High-Rep Courses where fatigue builds quickly
Carry Optics / USPSA Practice to build speed without bulky comps
Compact & Micro-Compact Builds where every millimeter counts
Key Features at a Glance
Construction: CNC-machined 416R stainless steel
Finish: Gold (premium, low-glare aesthetic)
Interface: 1/2x28 RH threads (U.S. standard for most 9mm/.380 barrels)
Design: S-Type Micro — minimal added length/weight for carry
Ports: Optimized to mitigate muzzle rise and stabilize sight tracking
Install: Simple screw-on; timing/retention per included instructions (verify hardware included)
Compatibility Notes
Fits threaded 9mm / .380 ACP barrels with 1/2x28 pitch and adequate barrel protrusion beyond the slide (Glock, SIG, CZ, M&P, Shadow Systems, and similar).
Works with many open-muzzle holsters; closed-end holsters may require a comp cut.
Tilting-barrel pistols generally run comps well; verify with your model and chosen ammo.
Installation & Setup (Quick Plan)
Ensure unloaded: Remove magazine, lock slide open, and visually/physically clear the chamber.
Prep threads: Clean and lightly oil barrel threads; hand test-fit the comp.
Time & secure:
If shims/crush washer are provided, time the ports per guidance.
If the unit uses set screws or O-ring retention, apply recommended thread locker and torque to spec.
Function check: Confirm full lock-up and slide/frame clearance through cycling.
Range verify: Fire 150–200 rounds of training ammo to confirm reliability, ejection pattern, and POI; then test your carry load and re-check zero.
Safety Tip: Re-check torque/retention after deep cleans or high round counts. Comps are not suppressors—do not stack devices unless explicitly supported by the manufacturer.
Care & Maintenance
Allow to cool; brush carbon from ports and threads with solvent.
Preserve the gold finish by avoiding harsh abrasives; wipe with a soft cloth.
Periodically re-torque set screws or re-apply thread locker as recommended.
Frequently Asked Questions
Q: What thread pitch does it use?
A: 1/2x28 RH, the typical U.S. standard for 9mm/.380 pistol barrels.
Q: Will it fit my pistol?
A: If your barrel is 9mm or .380 with 1/2x28 threads and enough protrusion beyond the slide, it should fit. Confirm slide/frame clearance and holster compatibility.
Q: Do I need a different recoil spring?
A: Many pistols run fine stock. If short-stroking occurs, consider spring tuning appropriate to your platform.
Q: Will a comp increase blast?
A: All comps redirect gas; expect more lateral blast. Use quality ear/eye protection and be mindful of shooters nearby.
Q: Is timing hardware included?
A: Packaging may vary. Follow the included instructions for shims, O-rings, or set screws if provided.
Technical Specs (Summary)
SEO Highlights (Naturally Woven)
True Precision micro compensator S-Type, gold finish, 416R stainless pistol comp, 1/2x28 threaded, 9mm/.380 ACP recoil reduction, EDC-friendly compensator, faster follow-up shots, flat-shooting handgun upgrade, TPSMICROG, UPC 719104540694.
Meta for Your Product Page
Meta Title: True Precision Micro Compensator S-Type — Gold, 416R, 1/2x28, 9mm/.380 | TPSMICROG
Meta Description: Compact S-Type micro compensator in a gold finish, CNC-machined from 416R stainless. 1/2x28 threads for 9mm/.380 ACP pistols. Real muzzle-rise reduction with a custom look. SKU TPSMICROG — UPC 719104540694.
From everyday carry to weekend drills, the True Precision Micro Compensator S-Type (Gold) delivers the flat recoil impulse, premium construction, and standout style that help you run your pistol faster—with control you can feel.
The End
