True Precision Inc Micro Compensator S-Type Spectrum 416R Stainless Steel 1/2"x28 Threads 9mm/380 ACP TPSMICROS

True Precision — Micro Compensator S-Type | Spectrum Finish | 416R Stainless Steel | 1/2x28 Threads | 9mm / .380 ACP | Model TPSMICROS | UPC 719104540724 Shoot flatter and stand out. The True Precision Micro Compensator S-Type in Spectrum blends real-world recoil control with a vivid, multi-color Spectrum (rainbow/PVD-style) finish that turns your EDC into a head-turning, high-performance build. Precision-machined from 416R stainless steel and sized for carry, TPSMICROS (UPC 719104540724) screws directly onto standard 1/2x28 pistol barrels in 9mm or .380 ACP, reducing muzzle rise for faster follow-ups—without the bulky footprint of race-gun comps. Model/SKU: TPSMICROS UPC: 719104540724 Material: 416R Stainless Steel (match-grade barrel steel) Finish: Spectrum (multi-color, PVD-style, low-glare & wear resistant) Thread Pitch: 1/2x28 RH Calibers: 9mm / .380 ACP Type: S-Type Micro Compensator (carry-oriented, minimal added length) Why Choose the True Precision S-Type Micro Comp (Spectrum) Real muzzle-rise reduction in a micro package Tuned upward ports counter muzzle climb, keeping irons or your red dot flatter through recoil so you can tighten split times and maintain sight picture under speed. EDC-friendly size The compact S-Type profile adds only modest length and mass, maintaining concealment and compatibility with many open-muzzle holsters. 416R stainless durability Built from the same steel used in premium match barrels for heat resistance, strength, and corrosion protection during high-round-count sessions. Striking Spectrum finish The multi-tone PVD-style coating delivers a custom, rainbow aesthetic that pairs beautifully with black nitride, DLC, FDE, or two-tone slides—while resisting scratches and carbon. Standard 1/2x28 interface Threads directly to most 9mm/.380 barrels—no adapters required. (Always verify your barrel’s pitch and ensure adequate protrusion beyond the slide.) Note: Comp performance depends on pistol, recoil spring rate, and ammunition. Start with quality factory 115–147 gr 9mm (or standard .380 ACP) and confirm reliability; some setups benefit from spring tuning. Performance You’ll Notice Flatter recoil impulse for quicker second shots Easier dot/iron tracking during rapid strings and transitions Less grip fatigue over long training days More consistent hits on drills like Bill, Blake, and throttle control Ideal Use Cases Concealed carry pistols with threaded barrels seeking discreet control Training & high-rep classes where fatigue adds up fast Carry Optics practice to build speed without race-gun bulk Compact & micro-compact builds where every millimeter matters Key Features at a Glance Construction: CNC-machined 416R stainless steel Finish: Spectrum multi-color, PVD-style (durable, low-glare) Interface: 1/2x28 RH threads (U.S. standard for most 9mm/.380 barrels) Design: S-Type Micro—minimal added length/weight for carry Ports: Optimized to mitigate muzzle rise and stabilize sight picture Install: Simple screw-on; timing/retention per included instructions (verify hardware included) Compatibility Notes Fits threaded 9mm / .380 ACP pistol barrels with 1/2x28 pitch and adequate barrel protrusion beyond the slide (e.g., Glock, SIG, CZ, M&P, Shadow Systems, and similar). Works with many open-muzzle holsters; closed-end holsters may require a comp cut. Tilting-barrel pistols generally run comps well; verify with your model and ammo. Installation & Setup (Quick Plan) Ensure unloaded: Remove magazine, lock slide open, visually/physically clear the chamber. Prep threads: Clean and lightly oil barrel threads; hand test-fit the comp. Time & secure: If shims/crush washer are supplied, time the ports per guidance. If your unit uses set screws or O-ring retention, apply recommended thread locker and torque to spec. Function check: Confirm full lock-up and slide/frame clearance through cycling. Range verify: Fire 150–200 rounds of training ammo to confirm reliability, ejection pattern, and POI; then test your carry load and re-check zero. Safety Tip: Re-check torque/retention after deep cleans or high round counts. Comps redirect gas—use quality ear/eye protection and be mindful of shooters nearby. Care & Maintenance Allow to cool; brush carbon from ports & threads with solvent. Wipe the Spectrum finish with a soft cloth; avoid harsh abrasives. Periodically re-torque set screws or re-apply thread locker as recommended. Frequently Asked Questions Q: What thread pitch is it? A: 1/2x28 RH, the most common standard for 9mm/.380 ACP pistol barrels in the U.S. Q: Will it fit my pistol? A: If your barrel is 9mm or .380 with 1/2x28 threads and enough protrusion beyond the slide, it should fit. Confirm slide/frame clearance and holster compatibility. Q: Do I need a different recoil spring? A: Many pistols run fine stock. If you encounter short-stroking, consider spring tuning typical for your platform. Q: Does a comp increase side blast? A: All compensators redirect gas; expect more lateral blast. Train accordingly. Q: Is timing hardware included? A: Packaging can vary. Follow the included instructions for shims, O-rings, or set screws if provided. Technical Specs (Summary) Model/SKU: TPSMICROS UPC: 719104540724 Material: 416R Stainless Steel Finish: Spectrum (multi-color PVD-style) Thread: 1/2x28 RH Calibers: 9mm / .380 ACP Design: S-Type Micro compensator SEO Highlights (Naturally Woven) True Precision micro compensator S-Type, Spectrum PVD-style finish, 416R stainless pistol comp, 1/2x28 threads, 9mm/.380 ACP recoil reduction, EDC-friendly compensator, flat-shooting handgun upgrade, faster follow-up shots, TPSMICROS, UPC 719104540724. Meta for Your Product Page Meta Title: True Precision Micro Compensator S-Type — Spectrum, 416R, 1/2x28, 9mm/.380 | TPSMICROS Meta Description: Compact S-Type micro compensator with a Spectrum (rainbow) PVD-style finish, CNC-machined from 416R stainless. 1/2x28 threads for 9mm/.380 ACP pistols. Real muzzle-rise reduction with custom style. SKU TPSMICROS — UPC 719104540724. From everyday carry to weekend drills, the True Precision Micro Compensator S-Type (Spectrum) delivers the flat recoil impulse, premium materials, and standout look that help you run your pistol faster—with control you can feel and style that won’t be missed. The End