True Precision — Micro Compensator Y-Type | Black DLC | 416R Stainless Steel | 1/2x28 Threads | 9mm / .380 ACP | Model TPYMICROBC | UPC 719104540946
Run flatter. Shoot faster. Stay in control. The True Precision Micro Compensator Y-Type in Black DLC delivers race-gun style recoil control in a compact, EDC-ready package for 9mm and .380 ACP pistols. Precision CNC-machined from 416R stainless steel—the same alloy used in match barrels—and coated in an ultra-hard Diamond-Like Carbon (DLC) finish, TPYMICROBC (UPC 719104540946) threads directly to standard 1/2x28 pistol barrels. The Y-pattern porting (top + angled side ports) counters muzzle climb and rotational torque so your irons or red dot track flatter through recoil—without adding bulky length or weight.
Model/SKU: TPYMICROBC
UPC: 719104540946
Material: 416R Stainless Steel (match-grade)
Finish: Black DLC (exceptional hardness, low friction, corrosion resistance)
Thread Pitch: 1/2x28 RH
Calibers: 9mm / .380 ACP
Type: Y-Type Micro Compensator (carry-oriented, minimal added length)
Why Choose the Y-Type Micro Comp (Black DLC)
Y-Pattern Gas Management (Top + Side Ports)
Optimized port geometry vents gas upward and outward to reduce muzzle rise and counter clockwise/anticlockwise torque, keeping your sight picture stable for faster, tighter splits.
EDC-Friendly Profile
The micro footprint preserves concealability and works with many open-muzzle holsters, making it a practical upgrade for daily carry pistols.
416R Core + DLC Armor
Match-barrel steel provides heat resistance and rigidity; DLC adds outstanding surface hardness, wear resistance, and a sleek, low-glare black that shrugs off sweat and holster use.
Standard 1/2x28 Mounting
Directly threads to most modern 9mm/.380 pistol barrels—no adapter required. (Always confirm pitch and ensure adequate barrel protrusion.)
Cleaner Operation & Easy Maintenance
DLC’s low-friction surface resists carbon adhesion for faster wipe-downs after high-round-count sessions.
Note: Comp performance varies with pistol model, recoil spring rate, and ammunition. Start with quality 115–147gr 9mm (or standard .380 ACP) and confirm reliability; consider spring tuning if needed for your platform.
Performance You’ll Notice
Flatter dot/iron tracking for quicker second shots
Reduced muzzle torque that helps strong/weak-hand control
More consistent hits in bill drills, transitions, and movement
Less grip fatigue over long training days
Ideal Use Cases
Concealed Carry: Real control gains without killing concealability
Training & Classes: Maintain sight picture as fatigue and heat build
Carry Optics Practice: Faster dot return without race-gun bulk
Compact/Micro Builds: Minimal added length where every millimeter counts
Key Features at a Glance
Construction: CNC-machined 416R stainless steel
Finish: Black DLC (hardened, low-glare, corrosion-resistant)
Interface: 1/2x28 RH threads (U.S. standard for most 9mm/.380 barrels)
Design: Y-Type Micro — multi-directional porting (top + angled sides)
Install: Simple screw-on; timing/retention per included instructions (verify included hardware)
Compatibility Notes
Fits threaded 9mm / .380 ACP pistol barrels with 1/2x28 pitch and sufficient protrusion beyond the slide (Glock, SIG, CZ, M&P, Shadow Systems, etc.).
Works with many open-muzzle holsters; closed-end holsters may require a comp cut.
Tilting-barrel pistols typically run comps well; verify with your model and ammo.
Installation & Setup (Quick Plan)
Ensure unloaded: Remove magazine, lock slide open, visually/physically clear chamber.
Prep threads: Clean and lightly oil barrel threads; hand test-fit.
Time & secure:
If shims/crush washer are included, time the ports per guidance.
If using set screws/O-ring retention, apply recommended thread locker and torque to spec.
Function check: Verify full lock-up and slide/frame clearance through cycling.
Range verify: Fire 150–200 rounds of training ammo to confirm reliability, ejection pattern, and POI; then test your carry load and re-check zero.
Safety Tip: Re-check torque/retention after deep cleans or high round counts. Comps redirect gas—use quality eye/ear pro and be mindful of shooters nearby.
Care & Maintenance
Allow to cool; brush carbon from ports and threads with solvent.
Wipe DLC exterior with a soft cloth—avoid harsh abrasives.
Periodically re-torque set screws or re-apply thread locker as recommended.
Frequently Asked Questions
Q: What thread pitch does it use?
A: 1/2x28 RH, the most common standard for 9mm/.380 ACP pistol barrels in the U.S.
Q: Will it fit my pistol?
A: If your barrel is 9mm or .380 with 1/2x28 threads and enough barrel protrusion, it should fit. Confirm slide/frame clearance and holster compatibility.
Q: Do I need different recoil springs?
A: Many pistols run fine stock. If you experience short-stroking, consider spring tuning appropriate for your platform.
Q: Does a comp increase blast?
A: All compensators redirect gas; expect more lateral blast. Train accordingly.
Q: Is timing hardware included?
A: Packaging may vary. Follow the included instructions for shims, O-rings, or set screws if provided.
Technical Specs (Summary)
SEO Highlights (Naturally Woven)
True Precision micro compensator Y-Type, Black DLC finish, 416R stainless pistol comp, 1/2x28 threaded, 9mm/.380 ACP recoil and muzzle-rise reduction, EDC-friendly compensator, faster follow-up shots, flat-shooting handgun upgrade, TPYMICROBC, UPC 719104540946.
Meta for Your Product Page
Meta Title: True Precision Micro Compensator Y-Type — Black DLC, 416R, 1/2x28, 9mm/.380 | TPYMICROBC
Meta Description: Compact Y-Type micro compensator in Black DLC, CNC-machined from 416R stainless. 1/2x28 threads for 9mm/.380 pistols. Multi-directional porting reduces climb and torque for faster, flatter shooting. SKU TPYMICROBC — UPC 719104540946.
From concealed carry to weekend drills, the True Precision Micro Compensator Y-Type (Black DLC) delivers premium materials, smart gas management, and a compact footprint—so you can run your pistol faster, flatter, and with confidence.
The End
