True Precision — Micro Compensator Y-Type | Black Nitride | 416R Stainless Steel | 1/2x28 Threads | 9mm / .380 ACP | Model TPYMICROBL | UPC 719104540922
Get race-gun control without race-gun bulk. The True Precision Micro Compensator Y-Type in Black Nitride brings noticeable muzzle-rise reduction to compact and micro-compact pistols chambered in 9mm or .380 ACP—and it stays holster-friendly for everyday carry. Precision CNC-machined from 416R stainless steel and coated in a tough, low-glare black nitride finish, TPYMICROBL (UPC 719104540922) threads directly to standard 1/2x28 pistol barrels. The Y-pattern porting (top plus angled side ports) manages both vertical climb and rotational torque, keeping your irons or red dot flatter and faster through recoil.
Model/SKU: TPYMICROBL
UPC: 719104540922
Material: 416R Stainless Steel (match-grade barrel steel)
Finish: Black Nitride (hardened, corrosion & wear resistant)
Thread Pitch: 1/2x28 RH
Calibers: 9mm / .380 ACP
Type: Y-Type Micro Compensator (carry-oriented, minimal added length)
Why Choose the True Precision Y-Type Micro Comp (Black Nitride)
Y-Pattern Gas Management
Strategically placed top and angled side ports vent gas to counter both muzzle rise and twist, giving you a flatter sight picture and quicker second shots.
EDC-Ready Size & Weight
The micro footprint adds only a modest amount of length and mass, preserving concealability and compatibility with many open-muzzle holsters.
416R Stainless Core + Nitride Armor
Built from premium 416R for strength and heat resistance, then treated with black nitride for a hard, slick surface that resists carbon, sweat, and holster wear.
Standard 1/2x28 Interface
Threads directly onto most modern 9mm/.380 pistol barrels—no adapter needed. (Always verify your barrel’s pitch and that it protrudes beyond the slide.)
Cleaner Operation
Nitride’s low-friction surface sheds fouling and wipes clean fast after high-round-count sessions.
Note: Compensator performance depends on pistol, recoil spring, and ammunition. Start with quality factory 115–147 gr 9mm (or standard .380 ACP) and confirm reliability. Some platforms may benefit from spring tuning.
Performance You’ll Notice
Flatter dot/iron tracking for faster follow-up shots
Reduced muzzle torque, improving one-handed control
More consistent hits during rapid strings and transitions
Less grip fatigue over long training days
Ideal Use Cases
Concealed Carry: Real control gains with minimal added length
Training & Defensive Handgun Classes: Maintain sight picture as fatigue builds
Carry Optics Practice: Faster dot return without race-gun bulk
Compact & Micro-Compact Builds: Every millimeter counts—this comp respects that
Key Features at a Glance
Construction: CNC-machined 416R stainless steel
Finish: Black Nitride (hardened, low-glare, corrosion-resistant)
Interface: 1/2x28 RH threads (U.S. standard for most 9mm/.380 barrels)
Design: Y-Type Micro — multi-directional porting for climb + torque control
Install: Simple screw-on fit; timing/retention per included instructions (verify included hardware)
Compatibility Notes
Fits pistols with 1/2x28 threaded 9mm / .380 ACP barrels and adequate barrel protrusion beyond the slide (Glock, SIG, CZ, M&P, Shadow Systems, etc.).
Works with many open-muzzle holsters; enclosed holsters may need a comp cut.
Tilting-barrel pistols generally run comps well; verify with your model and ammo.
Installation & Setup (Quick Plan)
Ensure unloaded: Remove mag, lock slide open, visually/physically clear the chamber.
Prep threads: Clean and lightly oil barrel threads; hand test-fit the comp.
Time & secure:
If shims/crush washer are supplied, time the ports per guidance.
If using set screws/O-ring retention, apply recommended thread locker and torque to spec.
Function check: Confirm full lock-up and slide/frame clearance through cycling.
Range verify: Fire 150–200 rounds of training ammo to confirm reliability, ejection pattern, and POI; then test your carry load and re-check zero.
Safety Tip: Re-check torque/retention after deep cleans or high round counts. Comps redirect gas—use quality eye/ear pro and be mindful of shooters nearby.
Care & Maintenance
Allow to cool; brush carbon from ports and threads with solvent.
Wipe the nitride exterior with a soft cloth; avoid harsh abrasives.
Periodically re-torque set screws or re-apply thread locker as recommended.
Frequently Asked Questions
Q: What thread pitch does it use?
A: 1/2x28 RH, the most common 9mm/.380 ACP pistol standard in the U.S.
Q: Will it fit my pistol?
A: If your barrel is 9mm or .380 with 1/2x28 threads and enough protrusion beyond the slide, it should fit. Confirm slide/frame clearance and holster compatibility.
Q: Do I need a different recoil spring?
A: Many pistols run fine stock. If short-stroking occurs, consider spring tuning appropriate for your platform.
Q: Does a comp increase blast?
A: All comps redirect gas; expect more lateral blast. Train accordingly.
Q: Is timing hardware included?
A: Packaging may vary. Follow the included instructions for shims, O-rings, or set screws if provided.
Technical Specs (Summary)
SEO Highlights (Naturally Woven)
True Precision micro compensator Y-Type, Black Nitride finish, 416R stainless pistol comp, 1/2x28 threaded, 9mm/.380 ACP muzzle-rise and torque reduction, EDC-friendly compensator, faster follow-up shots, flat-shooting handgun upgrade, TPYMICROBL, UPC 719104540922.
Meta for Your Product Page
Meta Title: True Precision Micro Compensator Y-Type — Black Nitride, 416R, 1/2x28, 9mm/.380 | TPYMICROBL
Meta Description: Compact Y-Type micro compensator in Black Nitride, CNC-machined from 416R stainless. 1/2x28 threads for 9mm/.380 pistols. Multi-directional porting reduces climb and torque for faster, flatter shooting. SKU TPYMICROBL — UPC 719104540922.
From concealed carry to weekend drills, the True Precision Micro Compensator Y-Type (Black Nitride) delivers premium materials, smart gas management, and a compact footprint—so you can run your pistol faster, flatter, and with confidence.
The End
