True Precision — Micro Compensator Y-Type | Copper Finish | 416R Stainless Steel | 1/2x28 Threads | 9mm / .380 ACP | Model TPYMICROC | UPC 719104540953
Race-gun control, carry-gun size. The True Precision Micro Compensator Y-Type in Copper delivers noticeable muzzle-rise and torque reduction for 9mm and .380 ACP pistols—without sacrificing concealment. Precision CNC-machined from 416R stainless steel and finished in a striking copper tone, TPYMICROC (UPC 719104540953) threads directly to standard 1/2x28 pistol barrels. The Y-pattern porting (top plus angled side ports) counters both vertical climb and rotational twist, helping your irons or red dot track flatter so you can shoot faster, cleaner strings on the clock and in training.
Model/SKU: TPYMICROC
UPC: 719104540953
Material: 416R Stainless Steel (match-grade barrel steel)
Finish: Copper (durable, custom look, low-glare)
Thread Pitch: 1/2x28 RH
Calibers: 9mm / .380 ACP
Type: Y-Type Micro Compensator (carry-oriented, minimal added length)
Why Choose the True Precision Y-Type Micro Comp (Copper)
Y-Pattern Gas Management (Top + Side Ports)
Tuned ports vent gas upward and outward to reduce muzzle rise and counter rotational torque, keeping your sight picture stable and flat for quicker second shots.
EDC-Friendly Size & Weight
The micro footprint adds only modest length and mass, preserving concealment and compatibility with many open-muzzle holsters—ideal for compact and micro-compact pistols.
416R Stainless Durability
Built from the same premium steel used in match barrels, the comp endures heat, cleaning cycles, and daily carry with excellent corrosion resistance.
Custom Copper Aesthetic
The bold copper finish pairs beautifully with black nitride, DLC, FDE, or two-tone slides, giving your build standout style without compromising performance.
Standard 1/2x28 Mounting
Threads directly to most modern 9mm/.380 pistol barrels—no special adapter required. (Always verify thread pitch and that the barrel protrudes beyond the slide.)
Note: Comp performance depends on pistol platform, recoil spring rate, and ammo. Start with quality factory 115–147 gr 9mm (or standard .380 ACP), confirm reliability, and consider spring tuning if needed for your setup.
Performance You’ll Notice
Flatter dot/iron tracking for faster follow-up shots
Reduced muzzle torque, improving strong/weak-hand control
More consistent hits in rapid strings, transitions, and movement
Less grip fatigue over long training days and high-rep classes
Ideal Use Cases
Concealed Carry: Real control gains with minimal added length and weight
Training & Defensive Handgun Classes: Maintain sight picture as fatigue builds
Carry Optics Practice: Faster dot return without race-gun bulk
Compact/Micro Builds: Every millimeter matters—this comp respects that
Key Features at a Glance
Construction: CNC-machined 416R stainless steel
Finish: Copper (durable, custom look, easy to clean)
Interface: 1/2x28 RH threads (U.S. standard for most 9mm/.380 barrels)
Design: Y-Type Micro — multi-directional porting (top + angled sides)
Install: Simple screw-on fit; timing/retention per included instructions (verify included hardware)
Compatibility Notes
Fits pistols with 1/2x28 threaded 9mm / .380 ACP barrels and adequate barrel protrusion beyond the slide (Glock, SIG, CZ, M&P, Shadow Systems, etc.).
Works with many open-muzzle holsters; enclosed holsters may require a comp cut.
Tilting-barrel pistols generally run comps well; verify with your model and ammo.
Installation & Setup (Quick Plan)
Ensure unloaded: Remove magazine, lock slide open, and visually/physically clear the chamber.
Prep threads: Clean and lightly oil barrel threads; hand test-fit the comp.
Time & secure:
If shims/crush washer are included, time the ports per guidance.
If using set screws/O-ring retention, apply recommended thread locker and torque to spec.
Function check: Confirm full lock-up and slide/frame clearance through cycling.
Range verify: Fire 150–200 rounds of training ammo to confirm reliability, ejection pattern, and POI; then test your carry load and re-check zero.
Safety Tip: Re-check torque/retention after deep cleans or high round counts. Comps redirect gas—use quality eye/ear pro and be mindful of shooters nearby.
Care & Maintenance
Allow to cool; brush carbon from ports and threads with solvent.
Preserve the copper finish by avoiding harsh abrasives; wipe with a soft cloth.
Periodically re-torque set screws or re-apply thread locker as recommended.
Frequently Asked Questions
Q: What thread pitch does it use?
A: 1/2x28 RH, the most common standard for 9mm/.380 ACP pistol barrels in the U.S.
Q: Will it fit my pistol?
A: If your barrel is 9mm or .380 with 1/2x28 threads and enough protrusion beyond the slide, it should fit. Confirm slide/frame clearance and holster compatibility.
Q: Do I need different recoil springs?
A: Many pistols run fine stock. If short-stroking occurs, consider spring tuning appropriate to your platform.
Q: Does a comp increase blast?
A: All comps redirect gas; expect more lateral blast. Train accordingly and use proper PPE.
Q: Is timing hardware included?
A: Packaging may vary. Follow the included instructions for shims, O-rings, or set screws if provided.
Technical Specs (Summary)
SEO Highlights (Naturally Woven)
True Precision micro compensator Y-Type, copper finish, 416R stainless pistol comp, 1/2x28 threaded, 9mm/.380 ACP muzzle-rise and torque reduction, EDC-friendly compensator, faster follow-up shots, flat-shooting handgun upgrade, TPYMICROC, UPC 719104540953.
Meta for Your Product Page
Meta Title: True Precision Micro Compensator Y-Type — Copper, 416R, 1/2x28, 9mm/.380 | TPYMICROC
Meta Description: Compact Y-Type micro compensator in a copper finish, CNC-machined from 416R stainless. 1/2x28 threads for 9mm/.380 pistols. Multi-directional porting reduces climb and torque for faster, flatter shooting. SKU TPYMICROC — UPC 719104540953.
From concealed carry to weekend drills, the True Precision Micro Compensator Y-Type (Copper) delivers premium construction, smart gas management, and a bold custom look—so you can run your pistol faster, flatter, and with confidence.
The End
