True Precision — Micro Compensator Y-Type | Satin Stainless | 416R Stainless Steel | 1/2x28 Threads | 9mm / .380 ACP | Model TPYMICROSS | UPC 719104540915
Get race-gun control in a carry-sized package. The True Precision Micro Compensator Y-Type in Satin Stainless tames muzzle rise on 9mm and .380 ACP pistols without adding bulky length or weight. Precision CNC-machined from 416R stainless steel and finished in a handsome low-glare satin, TPYMICROSS (UPC 719104540915) threads directly to standard 1/2x28 barrels. The Y-Type’s multi-directional porting (top and angled side ports) manages climb and torque so you can track your sights or red dot flatter, cut split times, and keep rounds on target under speed—while staying holster-friendly for everyday carry.
Model/SKU: TPYMICROSS
UPC: 719104540915
Material: 416R Stainless Steel (match-grade barrel steel)
Finish: Satin Stainless (durable, easy to clean, low-glare)
Thread Pitch: 1/2x28 RH
Calibers: 9mm / .380 ACP
Type: Y-Type Micro Compensator (carry-oriented, minimal added length)
Why Choose the True Precision Y-Type Micro Comp
Y-Pattern Gas Control (Top + Side Ports)
Tuned port geometry directs gas upward and slightly outward to counter muzzle climb and reduce rotational torque, keeping the slide/dot flatter through recoil for cleaner sight pictures and faster follow-ups.
EDC-Ready Size & Weight
The micro footprint adds only a modest amount of length and mass, preserving concealment and compatibility with many open-muzzle holsters—ideal for compact and micro-compact builds.
416R Stainless Durability
Built from premium 416R, the Y-Type withstands heat and hard use while resisting corrosion—perfect for daily carry and high-round-count training.
Satin Stainless Finish
The low-glare sheen pairs well with stainless and two-tone slides and wipes clean quickly after carbon-heavy sessions.
Standard 1/2x28 Mounting
Threads directly to most 9mm/.380 pistol barrels—no special adapters required. (Always confirm your barrel’s pitch and that it protrudes beyond the slide.)
Note: Compensator performance depends on pistol setup, recoil spring rate, and ammo. Start with quality factory 115–147gr 9mm (or standard .380 ACP) and confirm reliability. Some platforms may benefit from spring tuning.
Performance You’ll Notice
Flatter dot/iron tracking for quicker second shots
Reduced muzzle torque, improving control on strong/weak-hand strings
More consistent hits in bill drills, transitions, and movement
Less grip fatigue over long training days
Ideal Use Cases
Concealed Carry: Add real control without killing concealability.
Training & Classes: Keep the gun flatter as round counts and fatigue increase.
Carry Optics Practice: Faster dot return without full race-gun bulk.
Compact/Micro Builds: Every millimeter matters—this comp respects that.
Key Features at a Glance
Construction: CNC-machined 416R stainless steel
Finish: Satin Stainless (low-glare, corrosion resistant)
Interface: 1/2x28 RH threads (U.S. standard for most 9mm/.380 barrels)
Design: Y-Type Micro—multi-directional porting for climb + torque control
Install: Simple screw-on fit; timing/retention per included instructions (verify included hardware)
Compatibility Notes
Fits threaded 9mm/.380 ACP pistol barrels with 1/2x28 threads and adequate barrel protrusion (Glock, SIG, CZ, M&P, Shadow Systems, etc.).
Works with many open-muzzle holsters; closed-end holsters may require a comp cut.
Tilting-barrel pistols generally run comps well; verify with your specific model and ammo.
Installation & Setup (Quick Plan)
Ensure the pistol is unloaded: Remove magazine, lock slide open, visually/physically clear the chamber.
Prep threads: Clean barrel threads; test-fit the comp by hand.
Time & secure:
If shims/crush washer are supplied, time the ports per guidance.
If your unit uses set screws/O-ring retention, apply recommended thread locker and torque to spec.
Function check: Confirm full lock-up and that the comp clears the slide/frame through cycling.
Range verify: Fire 150–200 rounds of training ammo; confirm reliability, ejection pattern, and POI. Then vet your carry load and re-check zero.
Safety Tip: Re-check torque and retention after deep cleans or high round counts. Comps redirect gas—use quality ear/eye protection and be mindful of shooters nearby.
Care & Maintenance
Allow to cool; brush carbon from ports and threads with solvent.
Wipe the satin stainless exterior with a soft cloth; avoid harsh abrasives.
Periodically re-torque set screws or re-apply thread locker as recommended.
Frequently Asked Questions
Q: What thread pitch does it use?
A: 1/2x28 RH, the most common standard for 9mm/.380 ACP pistol barrels in the U.S.
Q: Will it fit my pistol?
A: If your barrel is 9mm or .380 with 1/2x28 threads and sufficient protrusion beyond the slide, it should fit. Confirm slide/frame clearance and holster compatibility.
Q: Do I need to change recoil springs?
A: Many pistols run fine stock. If you see short-stroking, consider spring tuning typical for your platform.
Q: Does a comp increase side blast?
A: All comps redirect gas; expect more lateral blast. Train accordingly and use proper PPE.
Q: Is timing hardware included?
A: Packaging can vary. Follow the included instructions for shims, O-rings, or set screws if provided.
Technical Specs (Summary)
SEO Highlights (Naturally Woven)
True Precision micro compensator Y-Type, satin stainless, 416R stainless pistol comp, 1/2x28 threads, 9mm/.380 ACP recoil and muzzle-rise reduction, EDC-friendly compensator, faster follow-up shots, flat-shooting handgun upgrade, TPYMICROSS, UPC 719104540915.
Meta for Your Product Page
Meta Title: True Precision Micro Compensator Y-Type — Satin Stainless, 416R, 1/2x28, 9mm/.380 | TPYMICROSS
Meta Description: Compact Y-Type micro compensator in satin stainless, CNC-machined from 416R steel. 1/2x28 threads for 9mm/.380 pistols. Multi-directional porting reduces climb and torque for faster, flatter shooting. SKU TPYMICROSS — UPC 719104540915.
From concealed carry to weekend drills, the True Precision Micro Compensator Y-Type (Satin Stainless) delivers premium materials, smart gas management, and a compact footprint—so you can run your pistol faster, flatter, and with confidence.
The End
