TruGlo Pistol Red Dot Sight Mount — Fortress Black Nitride, No-Mill Rear-Sight Adapter
Model: TG TG8950R2 • UPC: 788130026816
Add a micro red dot to your handgun—without milling your slide. The TruGlo Pistol Red Dot Sight Mount (Fortress Black Nitride) is a rugged rear-sight dovetail adapter that lets you mount today’s popular micro reflex optics while keeping your factory slide intact. Precision machined and black-nitride finished for exceptional wear and corrosion resistance, this low-profile plate delivers a secure optic interface, repeatable zero, and fast installation for duty, competition, training, or concealed carry builds.
Why Shooters Choose This TruGlo RDS Mount
No Gunsmithing Slide Cuts: Installs in your pistol’s rear sight dovetail—great for renters, agency guns, or anyone who wants optic capability without permanent modification.
Fortress Black Nitride Finish: Deep, hardened surface treatment improves corrosion resistance, wear life, and smooth holster draw, even in high-round-count training.
Steel, Not Just Aluminum: A robust steel body resists flex and holds torque to help maintain zero through recoil.
Low-Profile Footprint: Sits close to the slide for a cleaner presentation and easier concealment; compatible with many duty/carry holsters designed for optics (verify your holster model).
Purpose-Built Hardware: Includes mounting fasteners matched to the plate and optic interface (use thread locker and torque to spec).
Reversible Upgrade Path: Keep resale value—swap back to irons anytime by reinstalling your factory rear sight.
Key Features & Specs
Product: TruGlo Pistol Red Dot Sight Mount
Finish: Black Nitride (Fortress), low-glare
Construction: Precision-machined steel plate
Mounting Style: Replaces/uses the rear sight dovetail—no milling required
Optic Interface: Micro red-dot footprint (varies by specific optic; confirm footprint before purchase)
Model Number: TG TG8950R2
UPC: 788130026816
Use Cases: Concealed carry, competition, training, duty pistols, and range builds
Compatibility Note: Dovetail dimensions and optic footprints vary by pistol model and sight brand. Always check TruGlo’s fit chart and your pistol’s exact rear-sight cut and your optic’s footprint before ordering. Some pistols may require a model-specific plate; some optics need different screws or spacers.
Performance You Can Trust
A red dot sight can cut sighting time and boost precision—if the mount holds zero. This TruGlo plate is engineered to keep your optic solidly planted under slide velocity and recoil impulse, helping deliver consistent point of impact across strings and range sessions. The black-nitride “Fortress” finish resists sweat, solvents, and weather, making it ideal for EDC, range duty, and training classes.
Installation Tips (Read Before You Start)
Unload & Verify Clear. Safety first—remove mag, lock open, and visually/physically inspect.
Remove Rear Sight: Use a quality sight pusher; avoid hammering that can mar your slide.
Degrease & Dry: Clean dovetail, plate, and screws (isopropyl alcohol).
Fit & Center: Test-fit the plate; it should press in with firm, even pressure.
Torque & Thread Locker: Use blue thread locker on optic screws and torque to your optic maker’s spec (often 10–18 in-lb).
Confirm Zero: Re-zero after installation; confirm with your carry/training ammo.
Pro Setup Guidance
Back-Up Irons: Co-witness may require suppressor-height sights depending on your pistol/optic combo.
Holster Fit: Most modern “optic-ready” holsters will accommodate the additional height—verify before carry.
Battery & Brightness: Start with a fresh battery and daylight-bright setting; confirm dot isn’t starbursting based on your astigmatism.
Maintenance: Re-check torque after the first 100–200 rounds, then on your regular cleaning schedule.
Ideal Use Cases
EDC Pistols: Faster dot acquisition for low-light and dynamic scenarios without permanent slide work.
Competition/Training: Add a dot for speed and precision; revert to irons for rule changes or different divisions.
Agency/Armory Fleets: Standardize optical capability while retaining OEM slides for warranty and lifecycle management.
Frequently Asked Questions
Q: Do I need a gunsmith?
A: Many shooters install dovetail plates at home with a proper sight pusher and torque tools. If you’re unsure, a qualified gunsmith can complete the job quickly.
Q: Will it co-witness with my irons?
A: It depends on your slide height, optic window, and sight heights. Suppressor-height sights are commonly used to co-witness.
Q: What optics fit this plate?
A: The interface supports micro red dots per the plate’s footprint. Check TruGlo’s current compatibility list and your optic’s footprint (e.g., RMR, RMSc, Docter/Venom) before purchase.
Q: Is the nitride finish durable?
A: Yes. Black nitride offers superb wear and corrosion resistance and a smoother draw against holster channels.
SEO Highlights (Quick Scan)
TruGlo pistol red dot sight mount — Fortress Black Nitride, steel, no-mill rear-sight dovetail
Secure, low-profile plate for micro RDS; maintains zero under recoil
Ideal for EDC, competition, training, and duty pistols
Model TG TG8950R2, UPC 788130026816
Check pistol dovetail and optic footprint compatibility before ordering
Equip your handgun for modern speed and precision—without committing to a slide cut. The TruGlo Pistol Red Dot Sight Mount (TG TG8950R2) delivers a hardened black-nitride steel interface that installs fast, holds tight, and keeps your setup discreet, durable, and accurate.
"The End"
