Turbo Sonic Cleaning Solutions & Accessories | Ultrasonic Cleaner Essentials | Model: 100020130
Get professional-level results at home or in the shop with Turbo Sonic Cleaning Solutions & Accessories (100020130)—a complete, ultrasonic-ready lineup engineered to strip away carbon, powder residue, oils, and shop grime from metal parts quickly and safely. Whether you’re maintaining firearm components, brass cases, tools, engine smalls, jewelry, or precision instruments, Turbo Sonic solutions penetrate deep into tight crevices and passages that brushes can’t reach, restoring parts to a like-new, inspection-ready finish.
Purpose-formulated for ultrasonic cleaners, these concentrates and ready-to-use formulas pair perfectly with must-have accessories such as stainless baskets, parts trays, lid covers, beakers, and hanger racks to simplify workflow and protect delicate components. If you need consistent, repeatable cleanliness without harsh hand-scrubbing, Turbo Sonic is your go-to system.
Why Choose Turbo Sonic Cleaning Solutions & Accessories
Ultrasonic-Optimized Chemistry: Designed to cavitate efficiently, improving soil lift and rinse-off so parts come out cleaner, faster, and more uniform than with manual methods.
Tough on Residue, Gentle on Metals: Targets carbon, copper fouling, oils/grease, and shop debris while helping preserve base metals and surface finishes when used as directed.
Time-Saving Turnaround: Reduce teardown-and-scrub time—drop parts in, run a cycle, rinse, dry, and you’re back to building, tuning, or reassembling.
Versatile Applications: Ideal for firearm bolts, carriers, slides, gas system parts, small engine jets, carb bits, fasteners, tools, reloading dies, and jewelry (follow material guidance).
Accessories That Work: Stainless parts baskets keep items off the tank floor, beakers isolate sensitive parts or mixed chemistries, and lids/trays reduce evaporation and splatter.
Consistent Results: Reliable cleaning at repeatable dilution ratios delivers a clean you can measure—perfect for shops and hobbyists who demand uniformity.
What’s Included / Compatible (Varies by Selection)
Turbo Sonic Cleaning Solutions: Concentrated or ready-to-use formulas for general metal cleaning and brass case prep.
Ultrasonic Accessories: Stainless baskets, small-parts trays, beakers with holders, degas-ready lids, and rack systems to streamline loads.
Best-Practice Guide: Dilution recommendations, cycle timing tips, and material compatibility notes for dialed-in results.
Note: Exact items and sizes depend on the package/variant you choose under Model 100020130.
Key Features at a Glance
Model: 100020130 (Turbo Sonic Cleaning Solutions & Accessories)
Use With: Ultrasonic cleaning tanks (home or professional)
Targets: Carbon, copper/lead fouling, grease/oil, light oxidation, shop residue
Materials: Compatible with many ferrous and non-ferrous metals when used per instructions (see material guidance below)
Workflow: Soak → Ultrasonic cycle → Rinse → Dry → Lubricate/protect (as applicable)
Recommended Uses
Firearms Maintenance: Clean bolts, carriers, firing pins, slides, gas pistons, muzzle devices, and mag bodies (confirm finish compatibility; always re-lube/protect after cleaning).
Brass Case Prep: Remove carbon and residue from cases before resizing (final polish optional).
Shop & Garage: Restore carburetor jets, small fasteners, precision tools, and machine parts.
Hobby & Jewelry: Refresh stainless and certain non-porous items (avoid pearls/soft stones; follow jewelry-specific guidance).
How to Use (General Guidance)
Mix Solution: Follow label dilution (e.g., common ranges 1:10–1:40 depending on soil load and formula). Warm water improves performance.
Load Basket: Place parts in a stainless basket or beaker—do not rest items directly on the tank floor.
De-Gas Tank: Run a brief cycle with solution only to release trapped air for maximum cavitation.
Run Cycle: Typical cycles are 5–20 minutes; heavily fouled parts may need more than one pass.
Rinse Thoroughly: Use clean water to remove chemistry; for steel parts, follow with a water-displacing rinse if desired.
Dry & Protect: Compressed air or low-heat drying; then apply oil or corrosion inhibitor to steel/iron components.
Dispose Responsibly: Follow local regulations for solution disposal after heavy use.
Pro Tips for Best Results
Pre-Sort by Material: Separate aluminum, brass, and steel if you’re running different chemistries or concentrations.
Remove Elastomers & Optics: Take off rubber seals, O-rings, sights, batteries, or electronics before cleaning.
Mind Finishes: Test on an inconspicuous area for blued, anodized, or coated parts; reduce time/dilution if needed.
Keep Solution Clean: Strain or replace solution when it darkens or soils to maintain consistent cleaning action.
Heat Helps: 100–120°F (38–49°C) often improves performance—do not exceed manufacturer temp limits.
Safety & Compatibility
PPE: Wear gloves and eye protection when mixing or handling used solution.
Ventilation: Operate in a well-ventilated area; keep lids on during cycles.
Compatibility Check: Avoid ultrasonic cleaning of wood, leather, painted graphics, soft gemstones, or fiber-reinforced plastics unless approved.
After-Care: Always re-lubricate firearm parts and protect raw steel surfaces to prevent corrosion.
Who It’s For
Gunsmiths & Armorers: Fast turnaround and inspection-grade cleanliness.
Reloaders: Cleaner brass and dies with less manual effort.
Shops & Hobbyists: Repeatable results for small parts, hardware, and tools.
Detail-Oriented DIYers: A professional finish without professional overhead.
Frequently Asked Questions
Q: Can I use Turbo Sonic on blued steel or anodized aluminum?
A: Yes—with proper dilution and shorter cycles. Always test first and follow with fresh water rinse and a protective oil.
Q: Will it polish brass?
A: Turbo Sonic is a cleaner/degreaser. It removes fouling and residues; a separate tumbling/polish step can be used if you want shine.
Q: Do I need special accessories?
A: Baskets and beakers protect the tank and let you run multiple chemistries or isolate delicate parts—highly recommended for consistent results.
Q: How often should I replace the solution?
A: Replace when visibly soiled, performance drops, or per your shop’s quality control schedule.
SEO Highlights (Quick Scan)
Turbo Sonic cleaning solutions for ultrasonic cleaners—fast removal of carbon, oil, and residue
Compatible with firearm parts, brass cases, carb bits, tools, and precision hardware
Accessories: stainless baskets, trays, beakers, lids, and racks for safer, faster workflows
Model 100020130—professional results with repeatable dilution ratios and cycle times
Bring lab-clean performance to your bench with Turbo Sonic Cleaning Solutions & Accessories (100020130)—the efficient, ultrasonic-ready system for parts that must be truly clean, truly fast, every time.
"The End"
