Uncle Mike’s Sling Swivel Stud Kit – Universal Rifle/Shotgun Hardware (UPC 050806020474)
Mount a sling the right way—securely, cleanly, and built to last. The Uncle Mike’s Sling Swivel Stud Kit (UPC 050806020474) provides the essential front and rear attachment points you need to add a sling to most hunting rifles and shotguns. Trusted by generations of outdoorsmen, Uncle Mike’s studs are known for rock-solid retention, corrosion-resistant finishes, and a low-profile look that won’t snag in brush or on pack straps.
Whether you’re setting up a new season’s deer rifle, upgrading a favorite scattergun, or replacing worn hardware, this universal-style kit helps you install standard 1" or 1.25" sling swivels (sold separately) for safer carry, steadier field positions, and easier transport from truck to treestand.
Why Choose Uncle Mike’s 050806020474?
Universal Fitment – Works with most wood or synthetic stocks on popular rifles and many shotguns (stock-dependent).
Field-Proven Strength – Studs bite securely and stay put under real hunting loads and repeated carry.
Corrosion-Resistant Finish – Built to shrug off rain, mud, and salt air, season after season.
Low-Profile Heads – Clean appearance with minimal snag potential; looks factory-installed.
Straightforward Install – Clear, practical hardware layout for do-it-yourself installs (or a quick gunsmith job).
Budget-Smart Upgrade – A simple, cost-effective way to add sling capability or refresh aging studs.
Key Features at a Glance
Brand: Uncle Mike’s
Product: Sling Swivel Stud Kit
UPC: 050806020474
Compatibility: Most hunting rifles and shotguns (verify stock construction)
Sling Sizes: Accepts standard 1" or 1.25" swivel sizes (swivels sold separately)
Finish: Anti-corrosion, field-ready
Use Cases: Backcountry carry, stalks and walk-ins, boat and UTV transport, sling-supported shooting
In the Field: Real Benefits
Hands-Free, Safer Carry
A properly mounted sling keeps your muzzle controlled while you climb, glass, or drag a buck—two hands free when you need them.
Steadier Shots
Use your sling as a shooting aid from kneeling, sitting, or standing. Secure studs ensure your sling holds tension without shifting.
Cleaner Transport
From truck racks to boat runs, a slung firearm is less likely to slip or bang into hard surfaces (always practice safe handling).
Typical Kit Contents
Front and rear sling swivel studs (low-profile).
Mounting hardware appropriate for common stock types (wood-screw style and/or machine-thread post with nut, depending on production run).
Basic instructions for standard installations.
Note: Exact contents can vary slightly. Confirm hardware style matches your stock type (solid wood, synthetic, or hollow fore-end).
Installation Overview (High-Level)
Identify Stock Type: Wood vs. synthetic; determine if the fore-end is solid or hollow.
Plan Locations: Mark the fore-end centerline and buttstock toe-line for balance and clearance.
Drill Pilot Holes (Wood): Use the recommended bit size/depth to avoid splitting; keep holes square.
Install Studs: For synthetic/hollow stocks, use through-bolt + nut style hardware or proper inserts; avoid wood screws in thin shells.
Check Alignment: Ensure studs are straight and swivels articulate freely.
Attach Swivels & Sling: Test range of motion; verify gate closure and sling length before field use.
If drilling or backing access is uncertain, consult a qualified gunsmith.
Compatibility Notes
Rifles: Works for most bolt guns and many semi-auto hunting rifles that allow stock-mounted studs.
Shotguns: Suitable for many pump and semi-auto field guns; some models may need a barrel band or mag cap adapter (sold separately).
Swivels: Designed for detachable swivels in 1" or 1.25" widths—match to your sling.
Care & Maintenance
Inspect Tightness: Check stud tightness and swivel gates periodically, especially after long hikes or big temperature swings.
Protect Finish: Wipe with a lightly oiled cloth after wet hunts to deter rust.
Check Fit Annually: Confirm studs haven’t loosened in wood stocks due to seasonal expansion/contraction.
Frequently Asked Questions
Q: Will this kit fit a synthetic stock?
A: Yes—use the machine-thread post and backing hardware (or an appropriate insert). Avoid wood screws in thin synthetic shells.
Q: Do I need a gunsmith?
A: Many users install at home with basic tools (drill, bits, driver). If unsure about drilling depth or backing access, a gunsmith is recommended.
Q: Are swivels included?
A: No. This listing is for the stud kit. Add 1" or 1.25" swivels and a sling separately.
Q: What if my shotgun has no wood to bite into up front?
A: You may need a barrel band or magazine-cap sling mount designed for your model (sold separately).
SEO Highlights (Quick Scan)
Uncle Mike’s Sling Swivel Stud Kit 050806020474
Universal rifle/shotgun sling stud hardware
Corrosion-resistant, low-profile design
Supports 1" / 1.25" swivels (sold separately)
Easy, secure DIY installation; field-proven durability
The Bottom Line
The Uncle Mike’s Sling Swivel Stud Kit (UPC 050806020474) is the reliable, budget-friendly way to add sling capability to your rifle or shotgun. With tough hardware, clean looks, and straightforward installation, it’s a small upgrade that pays off every time you shoulder your gun and hit the trail.
The End
