Unity Tactical AXON™ Link – 7" Dual-Lead Remote Switch – Crane Laser + USB-C Weapon Light – Picatinny Mount – Black (AXN-UCI7B / AXNUCI7B) – UPC 810007882017
Unify your light and laser control with one low-profile, duty-ready switch. The Unity Tactical AXON™ Link is a dual-lead remote switch that drives a Crane-type laser/illuminator (standard “Crane” plug) and a USB-C interface weapon light from a single, tactile pad. Featuring an integrated Picatinny (MIL-STD-1913) mount, crisp button geometry, and a rugged black hard-anodized housing, Model AXN-UCI7B (AXNUCI7B) cleans up cable clutter and keeps activation exactly under your support-hand thumb. The 7-inch leads are tuned for SBRs, PCCs, and mid-length rails—long enough for smart routing, short enough to avoid snags.
One pad. Two devices. Zero compromise. Run your Crane-port laser and USB-C light independently or in concert (device dependent) without shifting your grip or hunting tailcaps.
Why Choose AXON™ Link (Black, 7")
Dual-lead versatility: Dedicated Crane plug for common LE/MIL lasers plus USB-C for modern weapon lights—no adapters or stacked pads.
Heads-up ergonomics: Low-profile pad places positive, repeatable activation at your natural thumb index for faster follow-ups and better recoil control.
Momentary & constant logic: Distinct, glove-friendly buttons deliver crisp tactile feedback for quick “IDs” or sustained light/laser (behavior varies by device).
Cable discipline built-in: 7" leads simplify routing on 10.3–13.9" guns and many 14.5–16" rails with fewer tie-downs and snag points.
Direct Picatinny mount: Integrated 1913 clamp offers rock-solid retention and repeatable indexing—no extra mounting plates required.
Duty-grade construction: Sealed electronics, reinforced strain reliefs, and hard-anodized aluminum housing withstand classes, weather, and vehicle racks.
Key Identifiers
Brand: Unity Tactical
Product: AXON™ Link – Dual-Lead Remote Switch
Leads: Crane laser plug + USB-C light plug
Lead Length: 7 inches (each)
Mounting: Picatinny / MIL-STD-1913 (integrated)
Finish/Color: Black, hard-anodized
Model / SKU: AXN-UCI7B / AXNUCI7B
UPC: 810007882017
Feature Highlights
Low-snag profile: Rounded edges and a slim silhouette reduce interference with slings, barricades, and kit.
Ambi-friendly layout: Symmetrical pad geometry indexes by feel under NODs or gloves from either side of the rail.
Weather resistant: Designed to keep dust and moisture out for reliable performance in rain, mud, or maritime conditions.
Cable-friendly exits: Angled ports hug the rail and deconflict with top-rail lasers (PEQ/DBAL/NGAL/MAWL-style) and BUIS.
Professional aesthetics: Matte black finish blends seamlessly with modern duty carbines and home-defense builds.
Compatibility note: Use with Crane-port lasers and USB-C interface weapon lights that support remote activation. Verify connector type/pinout and power requirements for your specific devices.
Real-World Performance You’ll Notice
Faster manipulations: Keep your master grip while toggling white light or laser—no more reaching for tailcaps in the dark.
Cleaner rail layouts: One pad replaces two, freeing rail space for magnifiers, irons, or handstops and reducing cable failures.
Consistent activation under stress: Distinct “click” feedback helps prevent accidental presses with heavy gloves or during shoulder transitions.
Better durability over time: Shorter, reinforced leads and tidy routing reduce fatigue and abrasion points.
Ideal Use Cases
LE/MIL & NVG shooters: Unified control for passive aiming and white light with intuitive, repeatable thumb indexing.
Home defense carbines: Simple, reliable light/laser management when adrenaline spikes.
Training & SBR/PCC builds: Optimized lead length for compact rails; fewer ties and cleaner management for high round counts.
Competition shooters: Low-drag pad and consistent activation for fast target transitions on dynamic stages.
Installation (Quick Start)
Unload & clear the firearm.
Mount AXON™ Link to a Picatinny section; seat fully and torque to Unity’s spec.
Route the 7" leads along the rail, avoiding hot gas blocks, suppressors, and moving parts.
Connect Crane lead to your laser; connect USB-C to your weapon light (ensure full seating/orientation).
Function check: Verify momentary and constant activation for each device—individually and together.
Secure cables: Use rail clips/One-Wrap; leave a small service loop near each device to reduce connector strain.
Pro Tip: Push the switch body forward against a rail slot before final torque for repeatable index and superior recoil resistance.
Specifications (At-a-Glance)
Type: Dual-lead remote switch (light + laser)
Leads: Crane laser plug + USB-C weapon light plug
Length: 7" leads
Mount: Integrated Picatinny/1913
Housing: Hard-anodized aluminum, Black
Controls: Tactile momentary & constant (device dependent)
Model: AXN-UCI7B / AXNUCI7B
UPC: 810007882017
Best Practices & Care
Dry-practice indexing so activation is subconscious, day or night.
Heat management: Keep cables clear of suppressors; route inside rail panels when possible.
Periodic checks: Re-verify clamp torque and inspect cables after your first range day and on a schedule.
SOP alignment: Ensure momentary/constant usage matches your unit’s light discipline and training protocols.
What’s in the Box*
SEO Highlights (Quick Scan)
Unity Tactical AXON Link – dual-lead remote switch
7" leads for Crane laser + USB-C weapon light
Integrated Picatinny mount, black hard-anodized housing
AXN-UCI7B / AXNUCI7B, UPC 810007882017
Streamlined light/laser control for duty, NVG, home defense, and competition
Suggested Meta Title
Unity Tactical AXON Link – 7" Dual-Lead Remote Switch | Crane Laser + USB-C Light | Picatinny, Black | AXN-UCI7B | UPC 810007882017
Suggested Meta Description
Unify low-light control with the Unity Tactical AXON Link. Dual-lead, 7" remote switch for Crane-port lasers and USB-C weapon lights, integrated Picatinny mount, and black hard-anodized durability. Model AXN-UCI7B (AXNUCI7B), UPC 810007882017.
The End
