Unity Tactical AXON SL™ – Single-Button Remote Switch for Crane-Laser Devices – Picatinny Mount – Matte Finish – Flat Dark Earth (AXN-SL-I7F / AXNSLI7F) – UPC 810007881492
Simplify your laser activation and keep your master grip. The Unity Tactical AXON SL™ is a single-button, low-profile remote switch designed specifically for Crane-port laser/illuminators. With a slim activation pad, an integrated Picatinny (MIL-STD-1913) mount, and a rugged Flat Dark Earth (FDE) matte hard-anodized housing, Model AXN-SL-I7F / AXNSLI7F (UPC 810007881492) delivers reliable, tactile control while freeing up rail space and reducing snag points. The 7-inch lead is tuned for SBRs, PCCs, and many 14.5–16" builds, giving you clean cable management without excess slack.
Why AXON SL™? “SL” = Slim/Low-profile. You get a compact, glove-friendly pad that supports momentary and constant-on (device dependent) in the smallest possible footprint—perfect for duty carbines, night training, and home-defense setups.
Top Benefits at a Glance
Crane-port compatibility: Purpose-built interface for common Crane-laser connectors used on PEQ/DBAL/NGAL/MAWL-style units.*
Single, decisive button: One large, tactile pad for eyes-off indexing—no fumbling with multiple controls under stress or NODs.
Integrated 1913 clamp: Direct-to-Picatinny mounting ensures a rock-solid hold and repeatable hand placement—no extra plates required.
Optimized cable length: 7" lead routes tight to the rail for neat, snag-resistant cable discipline.
Duty-grade durability: Aluminum housing, FDE matte hard-anodized finish, sealed electronics, and reinforced strain reliefs for hard use.
Slim silhouette: Radiused edges and low height minimize interference with slings, barricades, and gear.
*Always verify connector type, pinout, and your device’s remote-switch capability.
Product Identifiers
Brand: Unity Tactical
Product: AXON SL™ – Single-Button Remote Switch (Crane)
Lead/Connector: Crane-port laser plug
Lead Length: 7 inches (I7F variant)
Mounting: Picatinny / MIL-STD-1913 (integrated clamp)
Finish/Color: Flat Dark Earth (FDE), matte hard-anodized
Model / SKU: AXN-SL-I7F / AXNSLI7F
UPC: 810007881492
Feature Highlights
Momentary & constant-on logic: Distinct tactile click supports quick ID pulses or sustained activation (behavior depends on your laser unit).
Ambi-friendly placement: Mount left or right to match your grip, shoulder transitions, and barricade work.
Cable-exit geometry: Angled port tucks the lead along the rail, away from hot gas blocks and moving parts.
Weather-resistant sealing: Built to run in rain, dust, and mud—no intermittent flicker when it matters.
Professional FDE aesthetic: Low-glare finish blends with modern FDE receivers, rails, and accessories.
Real-World Advantages
Master-grip consistency: Keep your support-hand thumb fixed while activating the laser—no hunting tailcaps in the dark.
Cleaner rail management: Short, reinforced lead reduces tie-downs and failure points, simplifying maintenance.
Confidence with gloves & NODs: Positive click you can feel through duty gloves and night-vision-driven shooting positions.
Space for essentials: Slim pad preserves rail estate for irons, magnifiers, pressure pads, and handstops.
Ideal Use Cases
LE/MIL & NVG shooters: Subconscious activation for passive aiming and CQB white-light/laser workflows.
Home defense carbines: Simple, reliable switching when adrenaline spikes.
Competition/PCC: Low-drag ergonomics for fast, repeatable presentation and transitions.
Training SBRs: 7" lead is a sweet spot for 9–13.9" rails and many 14.5–16" guns.
Installation (Quick Start)
Unload & clear the firearm.
Mount the AXON SL™ to a Picatinny section where your support-hand thumb naturally rests. Torque per Unity’s guidance.
Route the 7" cable along the rail; avoid hot zones and moving parts.
Connect the Crane plug to your laser’s remote port; verify full seating and lock if applicable.
Function check: Confirm momentary/constant behavior (device dependent).
Secure the cable with clips/One-Wrap, leaving a small service loop to reduce connector strain.
Pro Tip: Push the switch body forward into a rail slot before final torque—this “mechanical index” resists recoil shift and preserves your thumb reference.
Specifications (At-a-Glance)
Type: Low-profile, single-button remote switch
Interface: Crane laser port (remote-activation compatible units)
Lead Length: 7 inches
Mount: Integrated Picatinny/1913 clamp
Housing: Aluminum, FDE matte hard-anodized
Controls: Tactile momentary & constant (device dependent)
Model: AXN-SL-I7F / AXNSLI7F
UPC: 810007881492
Best Practices & Care
Dry-practice indexing until activation is automatic, day or night.
Heat management: Route away from suppressors; use rail covers as standoffs where needed.
Periodic inspection: Re-check clamp torque after first range day; inspect strain reliefs and tie-downs quarterly.
SOP alignment: Match momentary/constant usage to agency policy or personal TTPs for light/laser discipline.
What’s in the Box*
Unity Tactical AXON SL™ – FDE (I7F, 7" Crane lead)
Mounting hardware & quick-start info
*Package contents may vary slightly by production lot—refer to your box label.
SEO Highlights (Quick Scan)
Unity Tactical AXON SL – single-button Crane-laser remote switch
7" lead, Picatinny mount, FDE matte hard-anodized aluminum
Tactile momentary/constant activation (device dependent)
AXN-SL-I7F / AXNSLI7F, UPC 810007881492
Low-profile, duty-ready switch for NVG, LE/MIL, competition, and home defense
Suggested Meta Title
Unity Tactical AXON SL – Single-Button Crane Laser Remote Switch, 7" Lead, Picatinny, FDE | AXN-SL-I7F | UPC 810007881492
Suggested Meta Description
Streamline laser control with the Unity AXON SL. Slim, single-button Crane-port remote switch with integrated Picatinny mount, 7" lead, and FDE matte hard-anodized housing. Model AXN-SL-I7F (AXNSLI7F), UPC 810007881492.
The End
