Unity Tactical AXON SYNC™ Link – 7" Dual-Lead Remote Switch – Crane Laser + USB-C Light – Picatinny Mount – Black (AXNS-UCI7B / AXNSUCI7B) – UPC 810007882031
Synchronize your laser and white light with one low-profile control. The Unity Tactical AXON SYNC™ Link is a next-gen dual-lead remote switch that drives a Crane-type laser (standard “Crane” plug) and a USB-C weapon light from a single, duty-grade pad. With tactile, glove-friendly buttons, integrated Picatinny (1913) mounting, and a stealth black anodized housing, Model AXNS-UCI7B (AXNSUCI7B), UPC 810007882031 cleans up cable clutter, speeds activation, and helps you keep a solid master grip in any lighting environment. The 7-inch leads provide ideal reach for SBRs, PCCs, and mid-length rails—tight routing with no snag loops.
SYNC it your way: Configure momentary and constant-on activation (device dependent) so your Crane-port laser and USB-C light work together or independently—without shifting your support-hand position.
Why Choose AXON SYNC™ Link (Black, 7")
Two devices, one pad: Dual leads—Crane for your laser/illuminator, USB-C for your weapon light—simplify your rail without stacking multiple switches.
Heads-up ergonomics: Slim pad places positive, repeatable activation right under your thumb for better recoil control and faster follow-ups.
Momentary & constant logic: Distinct buttons and crisp tactile feedback make short “IDs” or sustained light/laser easy to manage (behavior varies by device).
Cable discipline made simple: 7" leads are long enough for common 10.3–13.9" builds and many 14.5–16" rails, yet short enough to prevent slack and snags.
Direct Picatinny mount: Integrated 1913 clamp provides rock-solid retention and repeatable indexing—no extra adapters.
Duty-ready construction: Sealed electronics, reinforced strain reliefs, and black hard-anodized aluminum stand up to weather, range abuse, and vehicle racks.
Key Identifiers
Brand: Unity Tactical
Product: AXON SYNC™ Link – Dual-Lead Remote Switch
Lead Length: 7 inches (each)
Connections: Crane-type laser plug + USB-C light interface
Mounting: Picatinny / MIL-STD-1913 (integrated)
Finish/Color: Black, hard anodized
Model / SKU: AXNS-UCI7B / AXNSUCI7B
UPC: 810007882031
Feature Highlights
SYNC-optimized layout: Intuitive button spacing for simultaneous or independent light/laser use—easy to index under NODs or with gloves.
Weather-resistant sealing: Built to run in rain, mud, and maritime environments; resists dust and moisture ingress.
Low-snag silhouette: Rounded edges and a slim profile minimize interference with slings, barriers, and gear.
Cable-friendly routing: Exits are angled to hug the rail, simplifying management around PEQ/MAWL-style lasers and BUIS.
Color-matched hardware: All-black finish blends with modern duty carbines and night-vision setups.
Compatibility at a glance: Works with Crane-port lasers (ATPIAL/DBAL/NGAL-type ports) and USB-C interface weapon lights. Confirm your light’s connector and power requirements before live use.
Real-World Performance You’ll Notice
Faster, cleaner manipulations: Keep your master grip while toggling white light or laser—no hunting tailcaps in the dark.
More reliable cabling: Shorter leads reduce tie points and snag risk; reinforced strain reliefs extend service life.
Consistent activation: Distinct clicks you can feel and hear help prevent accidental presses under stress or with heavy gloves.
Tidy rail planning: One pad replaces two, freeing Pic rail for magnifiers, irons, or top-rail lasers.
Ideal Users & Use Cases
LE/MIL & NVG shooters: Unified control for passive aiming and white light—train day and night with the same thumb index.
Home defense & training carbines: Reduce cognitive load and keep controls intuitive under adrenaline.
Competition & PCC: Faster indexing, fewer cable failures, and a clean interface for dynamic stages.
Installation (Quick Overview)
Unload & clear your firearm.
Mount AXON SYNC™ Link to a Picatinny section; seat fully and torque to spec.
Route 7" leads along the rail, avoiding hot gas blocks, suppressor overhangs, and moving parts.
Connect leads: Crane plug to your laser; USB-C lead to your light (verify orientation and click-in).
Function check: Confirm momentary and constant activation for each device—individually and together.
Secure cables: Use rail clips/zip ties and leave a small service loop near devices to reduce connector stress.
Pro tip: Push the switch body forward against the rail slot before final torque for repeatable indexing and better recoil resistance.
Technical Specs (At-a-Glance)
Type: Dual-lead remote switch with SYNC logic
Leads: Crane laser plug + USB-C light plug
Lead Length: 7"
Mount: Integrated Picatinny/1913
Housing: Hard-anodized aluminum, Black
Controls: Tactile momentary & constant (device dependent)
Model: AXNS-UCI7B / AXNSUCI7B
UPC: 810007882031
Best Practices
Dry-practice indexing: Build subconscious muscle memory before night shoots.
Heat management: Keep cables away from suppressors and sharp M-LOK nuts to prevent sheath wear.
Periodic checks: Re-verify clamp torque and cable condition after first range day and at regular intervals.
Policy compliance: Ensure your constant-on and laser/light SOPs match unit/agency guidance.
What’s in the Box*
SEO Highlights (Quick Scan)
Unity Tactical AXON SYNC Link dual-lead remote switch
7" leads for Crane-type laser + USB-C weapon light
Picatinny mount, black hard-anodized housing
AXNS-UCI7B / AXNSUCI7B, UPC 810007882031
Streamlined light/laser control for duty, NVG, home defense, and competition
Suggested Meta Title
Unity Tactical AXON SYNC Link – 7" Dual-Lead Remote Switch | Crane Laser + USB-C Light | Picatinny, Black | AXNS-UCI7B | UPC 810007882031
Suggested Meta Description
Unify your light and laser with the Unity Tactical AXON SYNC Link. 7" dual-lead remote switch for Crane-port lasers and USB-C weapon lights, Picatinny mounting, and black hard-anodized durability. Model AXNS-UCI7B (AXNSUCI7B), UPC 810007882031.
The End
