Unity Tactical ModButton Lite™ – 7" Remote Switch for SureFire® Scout Light – Picatinny Mount – Flat Dark Earth (MBL-FDE-SF-7 / MBLFDESF7) – UPC 810007880761

Streamline your light control and keep your master grip locked in. The Unity Tactical ModButton Lite™ with 7-inch lead is a compact, tactile remote switch for SureFire® Scout Light weapon lights, built for direct Picatinny (MIL-STD-1913) mounting. This Flat Dark Earth (FDE) variant blends seamlessly with modern FDE builds while delivering the fast, positive activation you need for home defense, duty, PCC/competition, and low-light training. Model MBL-FDE-SF-7 / MBLFDESF7 (UPC 810007880761) routes cables tight to the rail, clicks clean through gloves, and reduces snag points so you can focus on the shot.

Why ModButton Lite™? A proven, ultra-slim footprint with a decisive, glove-friendly click—giving you quick momentary bursts and constant-on (device dependent) without the bulk of larger pads or the drift of tape switches.

Top Benefits

• SureFire® Scout compatibility: Direct plug-in lead for SureFire Scout-style lights and remote tailcaps—no adapters, fewer failure points.*

• Low-profile activation pad: Single, tactile button you can index by feel under NODs or stress.

• Integrated Picatinny clamp: Direct 1913 mount for a rock-solid hold and repeatable index—no additional plates needed.

• Optimized 7" lead: Ideal cable length for SBRs, PCCs, and many 13.9–16" carbines; cleaner routing, fewer ties.

• Duty-ready construction: Sealed electronics, reinforced strain reliefs, and a durable FDE matte finish for hard use.

• Cable discipline by design: Angled exit hugs the rail, keeping the lead away from heat and moving parts.

*Verify tailcap/connector compatibility and that your light supports remote activation.

Product Identifiers

• Brand: Unity Tactical

• Product: ModButton Lite™ – Remote Switch (SureFire)

• Connector/Lead: SureFire remote plug, 7-inch lead

• Mounting: Picatinny / MIL-STD-1913 (integrated clamp)

• Color/Finish: Flat Dark Earth (FDE), matte/duty-grade

• Model / SKU: MBL-FDE-SF-7 / MBLFDESF7

• UPC: 810007880761

Feature Highlights

• Momentary & constant logic: Distinct click supports quick ID pulses or sustained light (behavior varies by light/tailcap).

• Ambi-friendly placement: Mount left or right to match your support-hand C-clamp and shoulder transitions.

• Slim, snag-resistant pad: Radiused edges reduce interference with slings, gloves, barricades, and kit.

• Weather-resistant build: Designed to run in rain, dust, and mud without intermittent flicker.

• Pro FDE aesthetic: Blends with FDE receivers, rails, stocks, and accessories for a cohesive setup.

Fit Tip: Pair with a low-profile handstop so the pad sits naturally under your thumb—activation becomes subconscious, day or night.

Real-World Advantages

• Keep your master grip: No more hunting tailcaps; maintain recoil control and sight picture during light use.

• Fewer failure points: Integrated clamp + reinforced cable exits help resist loosening and fatigue over high round counts.

• Cleaner rail layouts: Slim pad conserves rail estate for lasers, BUIS, and magnifiers.

• Consistent through gloves: Positive click you can feel in winter or duty gloves.

Ideal Use Cases

• LE/MIL & NVG training: Intuitive, repeatable white-light control with a minimal footprint.

• Home defense carbines: Simple, reliable switching when seconds matter.

• Competition/PCC: Low-drag ergonomics and crisp activation for dynamic stages.

• Range SBRs & trainers: 7" lead routes neatly on compact rails with suppressors or front-end accessories.

Installation (Quick Start)

1. Unload & clear the firearm.

2. Mount ModButton Lite™ to a Picatinny section at your natural thumb index; torque to Unity spec.

3. Route the 7" cable along the rail; avoid suppressor heat, gas blocks, and moving parts.

4. Connect the SureFire plug to the compatible tailcap; verify full seating and retention.

5. Function check: Confirm momentary and constant-on behavior (device dependent).

6. Secure with rail clips or One-Wrap; leave a small service loop near the connector to reduce strain.

Pro Tip: Press the switch body forward into a rail slot before final torque. This “mechanical index” resists recoil shift and keeps your thumb reference consistent.

Specifications (At-a-Glance)

• Type: Low-profile remote switch for SureFire Scout-style lights

• Lead Length: 7 inches

• Controls: Tactile momentary & constant (device dependent)

• Mount: Integrated Picatinny/1913 clamp

• Housing/Finish: FDE matte, duty-grade, weather-resistant

• Model: MBL-FDE-SF-7 / MBLFDESF7

• UPC: 810007880761

Exact hardware, pad texture, and cable geometry may vary slightly by production run. Refer to product packaging for definitive details.

Best Practices & Care

• Dry-practice indexing until activation is automatic in all positions.

• Heat management: Keep cable off hot cans and sharp M-LOK nuts; consider rail covers as standoffs.

• Periodic checks: Re-torque after the first range day; inspect strain reliefs and tie-downs quarterly.

• Policy/TTP alignment: Match momentary vs. constant usage to your light discipline and SOPs.

What’s in the Box*

• Unity Tactical ModButton Lite™ – FDE (7" SureFire lead)

• Mounting hardware & quick-start info
  *Package contents may vary by production run—see box label.

SEO Highlights (Quick Scan)

• Unity Tactical ModButton Lite – 7" remote switch for SureFire Scout Light

• Picatinny mount, FDE matte finish, tactile activation

• MBL-FDE-SF-7 / MBLFDESF7, UPC 810007880761

• Low-profile, duty-ready control for home defense, LE/MIL, PCC, and SBR builds

Suggested Meta Title

Unity Tactical ModButton Lite – 7" SureFire Remote Switch, Picatinny, FDE | MBL-FDE-SF-7 | UPC 810007880761

Suggested Meta Description

Streamline white-light control with the Unity ModButton Lite in FDE. Slim, 7" SureFire remote switch with integrated Picatinny mount and tactile momentary/constant activation. Model MBL-FDE-SF-7 (MBLFDESF7), UPC 810007880761.

The End