Unity Tactical ModButton Lite™ Link – 7" Remote Switch for USB-C Weapon Lights – Picatinny Mount – Black (MBL-BLK-UC-7 / MBLBLKUC7) – UPC 810007881973

Clean up your rail and gain crisp, repeatable light control with the Unity Tactical ModButton Lite™ Link (USB-C). Purpose-built as a 7-inch remote switch for USB-C interface weapon lights, this compact controller features a tactile, single-pad design in a rugged black housing with an integrated Picatinny (1913) mount. Model MBL-BLK-UC-7 / MBLBLKUC7 (UPC 810007881973) routes tight, clicks clean, and keeps your support-hand thumb exactly where it needs to be—whether you’re running drills, working low-light searches, or setting up a streamlined home-defense carbine.

Why ModButton Lite™ Link? You get the slim footprint of ModButton Lite with a native USB-C lead for modern lights—no adapters, fewer failure points, and easier cable management.

Top Benefits

• Native USB-C connectivity: Direct plug to compatible USB-C weapon lights; forget legacy adapters and extra bulk.

• Low-profile activation pad: Compact, glove-friendly switch with a positive, tactile click for confident momentary and constant-on (device dependent).

• Integrated Picatinny mount: Direct 1913 clamp ensures a rock-solid hold and repeatable index—no additional mounting plates needed.

• Optimized 7" lead: Just-right cable length for SBRs, PCCs, and 13.9–16" builds; fewer ties, fewer snags.

• Duty-ready construction: Sealed electronics, reinforced strain reliefs, and a tough black finish designed for real-world abuse.

• Cable discipline by design: Angled exit keeps the lead tight to the rail and away from heat and moving parts.

Product Identifiers

• Brand: Unity Tactical

• Product: ModButton Lite™ Link – Remote Switch (USB-C)

• Connector: USB-C for compatible weapon lights

• Lead Length: 7 inches

• Mounting: Picatinny / MIL-STD-1913 (integrated clamp)

• Color/Finish: Black, matte, duty-grade

• Model / SKU: MBL-BLK-UC-7 / MBLBLKUC7

• UPC: 810007881973

Feature Highlights

• Momentary + constant logic: Distinct tactile feedback supports quick ID pulses and sustained output (behavior varies by light).

• Ambi-friendly placement: Mount left or right to match your support-hand thumb and shooting stance.

• Slim, snag-resistant silhouette: Radiused edges reduce interference with slings, barricades, and kit.

• Weather resistance: Built to run in rain, dust, and mud without intermittent activation.

• Professional aesthetics: Clean black finish integrates with black or two-tone builds.

Compatibility note: Verify your weapon light supports USB-C remote activation and confirm pinout/orientation before use.

Real-World Advantages

• Keep your master grip: Activate light without hunting tailcaps or breaking your index under NODs or stress.

• Cleaner rail layouts: One slim pad + 7" lead = fewer tie-downs, simpler maintenance, and fewer snag points.

• Consistency with gloves: Positive click you can feel through cold-weather or duty gloves.

• Reliability over time: Reinforced exits and integrated clamp reduce failure points across high round counts.

Ideal Use Cases

• LE/MIL & NVG training: Intuitive white-light control with minimal rail footprint.

• Home defense carbines: Simple, dependable switching when seconds matter.

• Competition/PCC: Low-drag ergonomics and crisp activation for dynamic stages.

• Range/Training SBRs: 7" cable routes perfectly on compact rails with lasers, BUIS, and handstops.

Installation (Quick Start)

1. Unload & clear the firearm.

2. Mount the ModButton Lite™ Link on a Picatinny section at your natural thumb index; torque per Unity specs.

3. Route the 7" cable along the rail; avoid suppressor heat, gas blocks, and moving parts.

4. Connect USB-C to your compatible light; verify full seating and correct orientation.

5. Function check: Confirm momentary/constant behavior (device dependent).

6. Secure the lead with rail clips/One-Wrap; leave a small service loop near the connector to reduce strain.

Pro Tip: Push the switch body forward into a rail slot before final torque. This “mechanical index” resists recoil shift and preserves your thumb reference point.

Specifications (At-a-Glance)

• Type: Low-profile remote switch (ModButton Lite™ Link)

• Connector: USB-C weapon light interface

• Lead Length: 7 inches

• Controls: Tactile momentary & constant (device dependent)

• Mount: Integrated Picatinny/1913 clamp

• Housing/Finish: Black, duty-grade, weather-resistant

• Model: MBL-BLK-UC-7 / MBLBLKUC7

• UPC: 810007881973

Best Practices & Care

• Dry-practice indexing so activation is subconscious day or night.

• Heat management: Keep cable runs off hot cans and sharp M-LOK nuts; add rail covers where needed.

• Periodic checks: Re-torque clamp after first range day; inspect strain reliefs and tie-downs quarterly.

• Policy/TTP alignment: Match momentary/constant use to your SOPs and light discipline.

What’s in the Box*

• Unity Tactical ModButton Lite™ Link – Black (7" USB-C)

• Mounting hardware & quick-start guide
  *Package contents may vary by production run—refer to your box label for definitive details.

SEO Highlights (Quick Scan)

• Unity Tactical ModButton Lite Link – 7" USB-C remote switch

• Picatinny mount, black finish, tactile activation

• MBL-BLK-UC-7 / MBLBLKUC7, UPC 810007881973

• Low-profile, duty-grade control for weapon lights on SBRs, PCCs, and carbines

Suggested Meta Title

Unity Tactical ModButton Lite Link – 7" USB-C Remote Switch, Picatinny, Black | MBL-BLK-UC-7 | UPC 810007881973

Suggested Meta Description

Streamline white-light control with the Unity ModButton Lite Link. Slim, 7" USB-C remote switch, integrated Picatinny mount, and tactile momentary/constant activation in a durable black housing. Model MBL-BLK-UC-7 (MBLBLKUC7), UPC 810007881973.

The End