Unity Tactical ModButton Lite™ Link – 7" Remote Switch for USB-C Weapon Lights – Picatinny Mount – Flat Dark Earth (MBL-FDE-UC-7 / MBLFDEUC7) – UPC 810007882215

Streamline your rail and get crisp, repeatable light control with the Unity Tactical ModButton Lite™ Link (USB-C) in Flat Dark Earth. Purpose-built as a 7-inch remote switch for USB-C interface weapon lights, this compact controller features a tactile single-pad design, rugged FDE housing, and an integrated Picatinny (MIL-STD-1913) mount for rock-solid placement. Model MBL-FDE-UC-7 / MBLFDEUC7 (UPC 810007882215) routes tight, clicks clean, and keeps your support-hand thumb exactly where it needs to be—on duty, at home, or on the clock.

Why ModButton Lite™ Link? The proven ModButton Lite footprint with a native USB-C lead means fewer adapters, fewer failure points, and cleaner cable management on modern carbine builds.

Top Benefits

• Native USB-C connectivity: Direct plug to compatible USB-C weapon lights—no legacy adapter stacks or extra bulk.

• Low-profile activation pad: Slim, glove-friendly switch with a positive, tactile click for momentary and constant-on (device dependent).

• Integrated Picatinny mount: Direct 1913 clamp ensures a secure hold and repeatable index—no additional plates required.

• Optimized 7" lead: Ideal cable length for SBRs, PCCs, and many 13.9–16" rails; reduces tie-downs and snag points.

• Duty-ready construction: Sealed electronics, reinforced strain reliefs, and a hard-wearing FDE finish built for weather and recoil.

• Cable discipline by design: Angled exit keeps the lead tucked tight to the rail and away from heat and moving parts.

Product Identifiers

• Brand: Unity Tactical

• Product: ModButton Lite™ Link – Remote Switch (USB-C)

• Connector: USB-C (weapon light interface)

• Lead Length: 7 inches

• Mounting: Picatinny / MIL-STD-1913 (integrated clamp)

• Color/Finish: Flat Dark Earth (FDE), matte, duty-grade

• Model / SKU: MBL-FDE-UC-7 / MBLFDEUC7

• UPC: 810007882215

Feature Highlights

• Momentary + constant logic: Distinct tactile feedback supports quick ID pulses and sustained output (behavior varies by light).

• Ambi-friendly placement: Mount left or right to match your support-hand index and shooting stance.

• Snag-resistant silhouette: Radiused edges reduce interference with slings, barricades, and kit.

• Weather resistant: Built to perform in rain, dust, and mud without intermittent activation.

• Professional FDE aesthetic: Blends seamlessly with modern FDE receivers, rails, and accessories.

Compatibility note: Confirm your weapon light supports USB-C remote activation and verify pinout/orientation before use.

Real-World Advantages

• Keep your master grip: Activate your light without hunting tailcaps or breaking your index under NODs or stress.

• Cleaner rail layouts: Slim pad + right-length cable = fewer tie-downs and faster maintenance.

• Consistency with gloves: Positive click you can feel through cold-weather or duty gloves.

• Reliability over time: Reinforced exits and integrated clamp reduce failure points across high round counts.

Ideal Use Cases

• LE/MIL & NVG training: Intuitive white-light control with minimal rail footprint.

• Home defense carbines: Simple, dependable switching when seconds matter.

• Competition/PCC: Low-drag ergonomics and crisp activation for dynamic stages.

• Range/Training SBRs: 7" cable routes perfectly on compact rails with lasers, BUIS, or handstops.

Installation (Quick Start)

1. Unload & clear the firearm.

2. Mount ModButton Lite™ Link on a Picatinny section at your natural thumb index; torque per Unity specs.

3. Route the 7" cable along the rail; avoid suppressor heat, gas blocks, and moving parts.

4. Connect USB-C to your compatible light; seat fully and verify orientation.

5. Function check: Confirm momentary/constant behavior (device dependent).

6. Secure the lead with rail clips/One-Wrap; leave a small service loop near the connector to reduce strain.

Pro Tip: Push the switch body forward into a rail slot before final torque—this “mechanical index” resists recoil shift and preserves your thumb reference point.

Specifications (At-a-Glance)

• Type: Low-profile remote switch (ModButton Lite™ Link)

• Connector: USB-C weapon light interface

• Lead Length: 7 inches

• Controls: Tactile momentary & constant (device dependent)

• Mount: Integrated Picatinny/1913 clamp

• Housing/Finish: FDE matte, duty-grade, weather-resistant

• Model: MBL-FDE-UC-7 / MBLFDEUC7

• UPC: 810007882215

Best Practices & Care

• Dry-practice indexing so activation becomes subconscious day or night.

• Heat management: Keep cable runs clear of hot cans and sharp M-LOK nuts; add rail covers where needed.

• Periodic checks: Re-torque clamp after the first range day; inspect strain reliefs and tie-downs quarterly.

• Policy/TTP alignment: Match momentary/constant use to your SOPs and light discipline.

What’s in the Box*

• Unity Tactical ModButton Lite™ Link – FDE (7" USB-C)

• Mounting hardware & quick-start guide
  *Package contents may vary by production run—refer to your box label for definitive details.

SEO Highlights (Quick Scan)

• Unity Tactical ModButton Lite Link – 7" USB-C remote switch

• Picatinny mount, FDE matte finish, tactile activation

• MBL-FDE-UC-7 / MBLFDEUC7, UPC 810007882215

• Low-profile, duty-grade control for weapon lights on SBRs, PCCs, and carbines

Suggested Meta Title

Unity Tactical ModButton Lite Link – 7" USB-C Remote Switch, Picatinny, FDE | MBL-FDE-UC-7 | UPC 810007882215

Suggested Meta Description

Streamline white-light control with the Unity ModButton Lite Link in FDE. Slim, 7" USB-C remote switch with integrated Picatinny mount and tactile momentary/constant activation. Model MBL-FDE-UC-7 (MBLFDEUC7), UPC 810007882215.

The End