Viper’s Venom Cutting Oil — High-Performance Metalworking Lubricant for Drilling, Tapping, Reaming & Threading (SKU 100013369)
Get cleaner cuts, cooler tools, and better finishes with Viper’s Venom Cutting Oil. Formulated for high-pressure metalworking, this pro-grade cutting fluid reduces friction and heat at the cutting edge so drills, taps, dies, and reamers last longer and bite cleaner. Whether you’re threading barrels and muzzle devices, building hardware, or tackling shop jobs in steel, stainless, aluminum, or non-ferrous alloys, Viper’s Venom delivers consistent lubrication that helps prevent galling, chip welding, and tool chatter.
Why Choose Viper’s Venom Cutting Oil?
Max Lubricity Under Load: Clings to the tool and workpiece at high RPMs and feed rates, minimizing friction where it matters most.
Cooler Cuts, Longer Tool Life: Efficient heat dissipation helps protect cutting edges and keeps work hardening at bay—especially in stainless.
Smoother Surface Finish: Reduces burrs and tearing for cleaner threads and more accurate hole sizing.
Versatile, Shop-Ready Formula: Works on carbon steel, stainless, tool steel, aluminum, brass, bronze, and copper—ideal for mixed-material benches.
Low Mist & Splash Tendency: Optimized body helps the oil stay put, improving control during handheld drilling and tapping.
Residue That Wipes Clean: Post-op cleanup is quick—wipe, degrease, and proceed to bluing, coating, or assembly.
Key Features & Specs
Product: Viper’s Venom Cutting Oil
SKU: 100013369
Use Cases: Drilling, tapping, reaming, threading, turning, and milling
Material Compatibility: Ferrous and non-ferrous metals (verify on magnesium or specialty superalloys)
Application Methods: Brush-on, squeeze-bottle drop, flood from oiler, or dab-on with swab
Post-Process: Wipes clean; compatible with typical solvent degreasers prior to finishing or threadlocker application
Where It Excels
Precision Threading: Hand and power tapping; protects fine-pitch dies and taps from galling.
Tough Metals: Stainless and hardened steels that heat up fast and dull tooling quickly.
One-Offs & Production: From a single custom part to extended runs—reliable film strength for consistent results.
Gunsmithing & Hobby Fabrication: Sight base drilling, accessory mounting, jig/fixture work, and hardware upgrades.
How to Use (Best Practices)
Prepare: Secure the workpiece; select the correct tool speed/feed and cutting geometry for your material.
Apply: Brush or drop Viper’s Venom onto the tool and entry point before the cut; reapply on deeper cuts or long threads.
Cut: Maintain steady feed; back off periodically when tapping to break chips and refresh oil.
Finish: Deburr as needed, then degrease if you’ll be painting, coating, or using threadlocker.
Store: Keep sealed and away from extreme temperatures when not in use.
Pro Tips for Cleaner Cuts
Use The Right Speed: Slower RPMs for tapping/threading hard steels; adjust feed to maintain chip formation.
Chip Control: For deep holes, peck drill—withdraw to clear chips and re-oil.
Tap Health: Reverse ¼–½ turn frequently to break the chip and avoid binding.
Finish Integrity: Always degrease before applying finishes or adhesives to ensure full bonding.
Safety & Handling
Use in a well-ventilated space; avoid prolonged skin contact.
Keep away from ignition sources; store in original container with cap closed.
Dispose of used oil in accordance with local regulations.
Who It’s For
Machinists & Fabricators needing a dependable all-around cutting fluid.
Gunsmiths & Armorers seeking cleaner threads and fewer broken taps.
DIY Builders & Hobbyists who want pro results with hand tools and drill presses.
Frequently Asked Questions
Q: Can I use Viper’s Venom on stainless?
A: Yes—its high film strength helps combat heat and galling common with stainless steels.
Q: Will it affect paint or threadlocker?
A: Degrease thoroughly after machining; clean metal accepts coatings and threadlockers normally.
Q: Is it only for tapping?
A: No—use it for drilling, reaming, sawing, turning, milling, and any operation where lubrication improves tool life and finish.
SEO-Friendly Search Terms
Viper’s Venom cutting oil, 100013369, tapping oil for stainless steel, drill and tap lubricant, metal cutting fluid for threading, cutting oil for AR builds, gunsmith cutting oil, machining coolant alternative, cutting lubricant for aluminum and steel.
Viper’s Venom Cutting Oil (SKU 100013369): high-lubricity, heat-taming performance for smoother cuts, longer tool life, and professional finishes—whether you’re threading stainless or drilling clean, burr-free holes in carbon steel.
The End
