Warne Red-Dot Riser — for Aimpoint® T1/T2 & Micro-Footprint Optics, Tactical Black Anodized (6106M • UPC 656813113422)
Get your dot exactly where you want it. The Warne Red-Dot Riser (6106M) lifts your Aimpoint® T1/T2 (and most optics using the same Micro footprint) to a mission-ready height for faster target acquisition, clean co-witness options, and a more natural, heads-up shooting posture. Precision-machined from lightweight 6061-T6 aluminum and finished in a durable tactical black anodize, this riser delivers the stiffness, repeatability, and return-to-zero confidence you expect from Warne—whether your rig is heading to the range, the match, or the field.
Why Choose the Warne 6106M Red-Dot Riser
Optimized height for speed: Raises your Aimpoint® Micro to a true carbine-ready sightline, speeding up dot pickup from low ready and improving situational awareness.
Micro-footprint compatibility: Designed for Aimpoint® T1/T2, it also fits many T1/T2-pattern red dots (verify your optic’s footprint and screw length).
Rock-solid build: 6061-T6 aluminum body and black anodize finish resist recoil, abrasion, solvents, and weather.
Repeatable zero: Precision machining and robust clamping geometry help preserve return-to-zero through transport, training blocks, and hard use.
User-friendly install: Ships with hardware and uses common tools for a quick, no-hassle mounting experience.
Lightweight advantage: Adds elevation without unnecessary ounces—ideal for duty rifles, PCCs, and lightweight builds.
Key Features at a Glance
Compatibility: Aimpoint® T1/T2 and optics with the T1/T2 Micro bolt pattern (check screw length & torque)
Material: 6061-T6 aluminum
Finish: Tactical black anodized
Interface: Micro-pattern top, Picatinny/Weaver base (most AR rails & PCCs)
Use Case: Height normalization, co-witness tuning, improved ergonomics and speed
Model / UPC: 6106M / 656813113422
Performance Benefits You’ll Notice
Faster heads-up sighting: The raised optic helps keep the rifle square to your eyes, reducing neck cranking and speeding up first-shot times.
Cleaner co-witness: Dial in an absolute or lower-third co-witness (depending on your iron setup and height-over-bore goals).
Better NODs/Mask clearance: Extra height creates room for gas masks, ear pro, or night-vision bridges, supporting consistent cheek welds in more conditions.
Stable under recoil: Rigid, full-contact clamping spreads load across the rail for less shift under sustained strings or rough handling.
Ideal Platforms & Setups
AR-15/AR-10 carbines seeking absolute or lower-third co-witness with standard-height irons.
Pistol-caliber carbines and braced builds needing a taller dot for upright posture.
Hunting & field rifles that benefit from faster dot pickup in brush and low light.
Competition rigs (USPSA/3-Gun/PCC) where tenths of a second on the presentation matter.
Installation & Setup Tips
Degrease & prep: Clean rail and hardware; lightly oil threads if specified by Warne.
Position: Set riser on a true Picatinny section, fully seated against a rail slot.
Torque: Install with proper torque values—avoid over-tightening to protect threads and finish.
Witness mark: After zeroing, paint witness marks on screws to track movement over time.
Re-check: Verify torque after the first range session or any heavy transport.
Note: Height-over-bore and co-witness vary by iron sight model and rail geometry. Confirm your desired absolute vs. lower-third with your specific sights and cheek-weld preference.
Specifications
Brand: Warne
Product: Red-Dot Riser for Aimpoint® T1/T2 pattern
Model Number: 6106M
UPC: 656813113422
Material: 6061-T6 aluminum
Finish: Black anodized (tactical)
Top Interface: Aimpoint® Micro (T1/T2) bolt pattern
Base Interface: Picatinny/Weaver rail
Included: Mounting hardware (per package)
Weight/Height: Varies slightly by batch—see current packaging/listing for exact figures
SEO Metadata (Merchant-Ready)
SEO Title: Warne Red-Dot Riser for Aimpoint T1/T2 — Tactical Black Anodized (6106M)
Meta Description (≤160 chars): Elevate your Aimpoint T1/T2 with the Warne 6106M red-dot riser—6061-T6 aluminum, black anodized, Picatinny base, fast co-witness setup.
Target Keywords: Warne 6106M, Warne red-dot riser, Aimpoint T1 T2 riser mount, Micro footprint riser, black anodized red dot riser, 656813113422
Alt Text (Images): “Warne 6106M red-dot riser for Aimpoint T1/T2, black anodized 6061-T6 aluminum with Picatinny base.”
FAQ
Q: Will this riser work with Holosun®/Primary Arms® Micro-style dots?
A: Many optics that use the Aimpoint® T1/T2 bolt pattern fit. Verify footprint and screw length for your specific optic.
Q: What co-witness height does 6106M give me?
A: It depends on your iron sight heights and rail geometry. Most ARs will achieve absolute or lower-third co-witness—confirm on your setup.
Q: Is return-to-zero reliable after removal?
A: Precision machining and secure clamping support repeatable zero. Re-install in the same rail slot and re-torque to spec for best results.
Q: Can I use it on a shotgun or PCC?
A: Yes—if the firearm has a Picatinny/Weaver rail and your optic uses the T1/T2 pattern, the riser can be used (observe recoil and torque guidance).
Q: What tools/torque do I need?
A: Common hex/Torx tools; follow Warne’s torque specs in the package/manual for screws and cross-bolts.
Raise your red dot to the perfect plane—Warne’s 6106M Red-Dot Riser delivers the height, durability, and repeatability serious shooters demand, with Aimpoint® T1/T2 compatibility and a tactical black anodized finish that looks as good as it performs.
The End
