The Wilson Combat Beretta Battlesight Black Rear Sight – Model 630 (UPC: 874218009519) is a purpose-built tactical rear sight designed by Bill Wilson specifically to give Beretta 92/96 shooters a faster, clearer sight picture in low-light and dynamic shooting conditions. With its .150" wide deep U-notch, black serrated blade, and rugged steel construction, this Battlesight is a serious upgrade over factory rear sights for duty, defense, and performance-driven range work. Wilson Combat+2BattleHawk Armory+2
If you run a Beretta 92FS or 96FS and want a rear sight that’s easier to see, easier to track, and built to last, the Wilson Combat 630 Battlesight delivers exactly that.
Optimized U-Notch for Low-Light & Fast Sight Acquisition
Developed from the ground up for real shooters, the Beretta Battlesight features a .150" wide, deep U-notch cut into the rear blade: LG Outdoors Website+4Hinterland Outfitters+4BattleHawk Armory+4
The wider, deeper U-notch makes it faster to pick up the front sight under stress.
Helps your eye naturally center the front post, ideal for concealed carry, duty, or competition.
Offers an uncluttered, high-contrast sight picture that works especially well in poorly lit environments or with aging eyes. Wilson Combat+2Pelcher Outdoors+2
Compared to narrow factory sights, the Battlesight’s U-notch gives you a more forgiving window that still supports precise shots at distance.
Black Serrated Rear – Crisp, Non-Glare Sight Picture
The rear blade of the 630 Battlesight is concave and serrated at 40 lines per inch (lpi): LG Outdoors Website+4Hinterland Outfitters+4BattleHawk Armory+4
Fine 40 lpi serrations break up glare, even in bright outdoor conditions.
The concave shape and semi-circular recessed notch pocket help frame the front sight for a sharp, protected sight picture.
All-black, serrated surface keeps your focus where it matters—on the front sight and target, not on reflections.
This design gives you a clean, tactical sight picture perfectly suited for serious use.
Pyramid-Shaped Rear Blade – Less Target Obstruction
Wilson Combat shapes the rear sight into a subtle pyramid profile, which: Wilson Combat+2Palmetto State Armory+2
Obstructs less of the target while you’re shooting.
Provides reference edges that are easy to align without blocking your field of view.
Balances precision at distance with speed up close, making it ideal for defensive and dynamic matches.
The result is a sight that feels fast, yet refined, whether you’re clearing drills at 7 yards or stretching out to 25.
External Front Shelf for One-Handed Slide Manipulation
One standout feature of the Beretta Battlesight is its machined external front shelf: LG Outdoors Website+4Wilson Combat+4BattleHawk Armory+4
Allows one-hand slide cycling off a belt, holster, or hard edge.
Provides a sturdy ledge for malfunction clearance when only one hand is available.
Adds real-world functionality for duty, defensive carry, and training under stress.
This shelf is carefully machined into the sight body so it’s strong enough for serious use without being overly bulky.
Drop-In Steel Rear Sight with Set Screw Retention
The Wilson Combat 630 Battlesight is built from high-quality steel with a black finish and designed as a drop-in replacement for many Beretta models: LG Outdoors Website+4Hinterland Outfitters+4BattleHawk Armory+4
Drop-in fit for most Beretta 92/96, 92FS/96FS pistols (may require light fitting on some slides).
Uses rock-solid set screw retention so the sight stays put under recoil.
Steel construction stands up to hard use, repeated holster draws, and daily carry.
This is not a flimsy accessory—it’s a serious duty-grade rear sight built to match Wilson Combat’s reputation.
Standard .270" Rear Height – Factory Replacement Spec
The 630 Battlesight is configured as a standard factory replacement height: LG Outdoors Website+4Hinterland Outfitters+4BattleHawk Armory+4
On Beretta 92/96 models with the front sight integral to the slide, changing rear height is the main way to fine-tune point of impact. Wilson Combat notes that raising rear sight height by .010" moves POI up ~1.7" at 20 yards, so the .270" Battlesight is the correct “factory” reference point for most setups. BattleHawk Armory+1
Ideal Sight Picture for Aging Eyes & Defensive Use
The Beretta Battlesight was designed to solve common sighting challenges:
Low light: Wide U-notch and all-black serrations help you stay on target when lighting is poor. Wilson Combat+2Pelcher Outdoors+2
Dynamic shooting: The generous notch facilitates fast front-sight acquisition during transitions and rapid fire.
Aging eyesight: Shooters with presbyopia or reduced near focus benefit from the bolder, more open rear notch.
Whether you’re training, competing, or carrying a Beretta for defense, the 630 Battlesight gives you a sight picture that is faster to see and easier to use.
Perfect Match for Beretta 92FS/96FS Platforms
This rear sight is tailored to the classic full-size Beretta pistols so many shooters trust: LG Outdoors Website+3Hinterland Outfitters+3BattleHawk Armory+3
Firearm fit: Beretta 92FS / 96FS and other 92/96 models with compatible dovetail.
Mount type: Dovetail rear, with set screw.
Application: Duty, home defense, concealed carry, range, IDPA/USPSA-style matches, and general tactical shooting.
If your Beretta is still running factory sights, this Battlesight is a high-impact upgrade that leverages the pistol’s inherent accuracy.
Key Specifications – Wilson Combat Beretta Battlesight Rear Sight 630
From Wilson Combat and leading retailers: LG Outdoors Website+4Wilson Combat+4BattleHawk Armory+4
Brand: Wilson Combat
Product: Beretta Battlesight Black Rear Sight
Model / Part Number: 630
UPC: 874218009519
Firearm Fit: Beretta 92FS/96FS and compatible 92/96 variants
Material: Steel
Finish / Color: Black, serrated rear blade
Rear Height: .270" (standard factory replacement)
Notch Style: .150" wide, deep U-notch
Blade Features:
Concave rear blade
40 lpi serrations for non-glare surface
Semi-circular recessed notch pocket
Pyramid-shaped rear profile
Functional Features:
External front shelf for one-hand slide cycling / malfunction clearance
Drop-in fit (may require minor fitting)
Set screw retention for rock-solid hold
SEO-Focused Summary
The Wilson Combat Beretta Battlesight Black Rear Sight 630 874218009519 is a tactical steel rear sight designed by Bill Wilson for Beretta 92/96 and 92FS/96FS pistols. Featuring a .150" wide deep U-notch, 40 lpi serrated concave blade, pyramid-shaped rear profile, and an external front shelf for one-handed slide manipulation, this .270" height black rear sight delivers a fast, high-visibility sight picture in low-light and dynamic shooting conditions, making it an ideal upgrade for defensive carry, duty use, and performance shooting on Beretta platforms. LG Outdoors Website+4Wilson Combat+4BattleHawk Armory+4
The End
